OdysseyGPT

Standards explainer

Class type approval: what it is, how it differs from design approval and a unit certificate, and what to check in a shipyard enquiry

A plain-English overview of type approval by a classification society for sales, approvals and quality engineers at marine equipment makers, with the public registers and an enquiry checklist.

By Ademola Afolabi, Founder, New Odyssey Ltd · Last reviewed:

The short answer

Type approval is a classification society's confirmation that a product design meets its rules, so the design can be used on many ships without a fresh design review each time. It differs from approval of a design for one ship, and it is not the certificate a surveyor issues for a delivered unit after survey.

Key Takeaways

  • Type approval covers a design for repeated use. It is granted by one society under that society's rules.
  • Design approval for one ship is the case-by-case route when no type approval exists or the certificate does not cover what is offered.
  • A certificate for the delivered unit, issued after survey, is a separate thing. The rules say when it is needed.
  • Each society publishes a register of approvals. Check it before you quote and again before you deliver.

See how OdysseyGPT reviews a tender. Tell us how your team reviews tenders today. We can walk through an example together. Book a call

What is type approval by a classification society?

A classification society writes rules for ships and checks ships and their equipment against them. Much equipment is made in series: the same pump range, cable type, circuit-breaker or control system goes onto hundreds of hulls. Reviewing the same design afresh for every ship would waste everyone's time.

Type approval is the answer to that. The society reviews the design once, has the product tested, and issues a type approval certificate for a defined product or range. DNV describes it as approval of a design for repeated use, based on design assessment, testing and document review, and aimed at series production. ABS describes its design assessment as a technical evaluation of a product for use on many ABS-classed units.

  • It belongs to one society. A certificate from one society is not automatically accepted by another.
  • It covers what the certificate lists: the models, sizes, ratings, materials and conditions of use. Anything outside that list is not covered.
  • It is tied to the maker and, in several schemes, to the place of manufacture.
  • It is time-limited and can be withdrawn.
  • It is often voluntary from the society's side. ABS states in its published answers that its own rules do not currently require type approval for any product. Yards and owners ask for it anyway, because it shortens approval.

Type approval, design approval for one ship and the unit certificate

Three different things are often called class approval in an enquiry. They answer different questions, and an offer should say which of them it includes.

Three kinds of class approval for equipment (own summary of public DNV and ABS descriptions)
Type approvalDesign approval for one shipProduct or unit certificate
Question it answersDoes this design meet the rules in general?Does this design meet the rules for this installation?Does this delivered unit match the approved design and pass its tests?
CoversA product or range, for repeated useOne design for one ship or series of sister shipsOne unit or batch, by serial number
Based onDesign review, type testing and, in most schemes, an assessment of the factoryReview of the drawings and calculations submitted for the orderSurvey at the works: witnessed tests, checks of material traceability and review of certificates
What the maker receivesA type approval certificate with an expiry dateApproved or commented drawings, or a letter. ABS calls its one-off approval a design review letterA certificate issued by the surveyor, or the maker's certificate endorsed by the surveyor
When it happensBefore any order, at the maker's initiativeAfter order, on the project programmeAt the end of manufacture, before dispatch

The three can stack. A type approved pump may still need a surveyor at the works test and a certificate for each unit, because the society's rules ask for that for the pump's duty on board. ABS puts it simply in its published answers: a product either requires unit certification under the rules or it does not, and where it does the unit is tested at the maker's shop with the surveyor present. Type approval settles the design. It does not, on its own, remove a survey the rules require.

Read what the yard actually wrote

"Class approved", "type approved" and "with class certificate" are not the same request. The first is vague, the second is about the design and the third is about the delivered unit. If the wording is unclear, raise a clarification and state in the offer exactly which certificates you will supply.

What are the typical steps to type approval?

Each society runs its own scheme, with its own forms, fees and programme documents. At concept level the steps are similar. This is our own outline, not a procedure. Follow the scheme documents of the society you apply to.

  1. Application. The maker applies for a named product or range and states the rules and standards it wants the design assessed against.
  2. Design assessment. The society reviews drawings, datasheets, calculations and existing test results.
  3. Type testing. A sample is tested to an agreed programme. DNV states that tests must be done by suitably accredited laboratories and that its own staff witness the testing its rules require.
  4. Assessment of the factory. The society checks that the maker can produce the product consistently to the assessed design. ABS calls this the manufacturing assessment and asks for a valid ISO 9001 certificate or an equivalent.
  5. Certificate and listing. The society issues the certificate and lists the product in its public register.
  6. Upkeep. Audits or periodic assessments follow during the life of the certificate, and the maker reports design changes.

ABS splits the result into two certificates. A product with only the design assessment is listed as design assessed. A product is called type approved once it also has a valid manufacturing assessment. If an offer says "ABS type approved", check that both parts are in place.

How long is a type approval valid, and how is it renewed?

A type approval certificate has an expiry date printed on it. That date applies to the certificate, not to equipment already delivered under it. Before the date, the maker applies for renewal and the society decides what has to be reviewed or tested again.

  • ABS publishes a period of five years for its design assessment certificate, subject to design modifications and rule changes, and five years for its manufacturing assessment certificate, subject to annual plant audits.
  • For other societies, read the expiry date and the conditions on the certificate itself. Do not assume a standard period.
  • A certificate can lose its validity early. Typical reasons are a design change that was not reported, a failed audit or a rule change that the approved design no longer meets.
  • A rule change can limit a certificate without ending it. ABS, for example, publishes a limited category for products that comply with an earlier rule and may be used only on vessels contracted before the newer rule took effect.

For a maker, the practical point is timing. A certificate that is valid on the day of the offer may expire before delivery, which can be a year or more later. Check the date against the delivery date of the last ship in the series, and say in the offer what happens if renewal is pending.

What do the public registers show?

Each society publishes its approvals. A yard's purchasing department and an owner's superintendent can look your product up in minutes, so look first.

Public approval registers of three societies (as described on their own pages, read 15 Nov 2026)
SocietyRegisterWhat the society says it shows
DNVApproval FinderValid approvals issued by DNV, including type approvals, Marine Equipment Directive approvals, and approvals of manufacturers and service suppliers. DNV notes that what is shown is a copy and an excerpt of the certificate, without signature, limited to what was agreed with the certificate holder
ABSType approval databaseDesign assessment certificates, with the manufacturing assessment details shown within them. A maker that holds both can obtain a confirmation of type approval
Lloyd's RegisterList of type approved productsType approved products, searchable by product, certificate number, country and producer
  • A register entry is not the full certificate. Conditions and limits may only be on the certificate issued to the holder.
  • A register shows the position on the day you look. Look again before delivery.
  • Other societies, such as Bureau Veritas and ClassNK, publish their own lists. Use the register of the society named in the enquiry.

Is class type approval the same as the wheel mark?

No. Class type approval is given by a society under its own rules. The wheel mark is a statutory mark under the Marine Equipment Directive for equipment on ships under an EU flag, and it follows a conformity assessment by a notified body. The same organisation may act in both roles, which causes confusion, but the certificates are different and one does not replace the other. A shipyard enquiry can ask for both on a single item.

Where does OdysseyGPT fit, and where does it not?

OdysseyGPT is document review software. Document Review compares a yard's enquiry with your offer documents and quotes both sides for each finding. If you upload the type approval certificate as a document, it can show what the certificate states about scope and expiry next to what the enquiry asks for. Customer Specification Review (beta) lists the approval, certificate and witnessing clauses of a specification as a register.

  • It does not grant, renew or check a type approval. Only the society does that.
  • It does not query Approval Finder, the ABS database, the Lloyd's Register list or any other register.
  • It does not read drawings, so it has no part in a design assessment.
  • It does not decide whether a certificate covers the size or option you offer. It shows the two texts and an engineer decides.

What to check in a shipyard enquiry about class approval

Class approval points to check before you quote
CheckWhy it matters
The classification society and the full class notation for the hullApproval is given by one society. An extra notation can add requirements your standard product was not approved against
The exact words used: type approved, class approved, or with class certificateThey ask for different things: a design approval, something undefined, or a certificate for the delivered unit
Whether you hold a type approval certificate from that society for the product offeredIf not, you need design approval for this ship, which adds time and fees
The certificate's scope against the model, size, rating, material and options offeredA certificate for part of a range does not cover the rest
The expiry date against the delivery date of the last unitA certificate that lapses before delivery leaves the yard without valid evidence
Conditions and limits printed on the certificateLimits on location on board, ambient conditions or application may conflict with the yard's use
Whether the rules or the yard require a certificate for each unit after surveyType approval alone may not be enough. Surveyor attendance has to be planned and priced
Which tests the surveyor, the yard and the owner will witness, and the notice periodEach attendance is a hold on dispatch
Which drawings go to the society for this order, and who submits themEven with type approval, installation or system drawings may need approval for the ship
Material certificate type for the parts the rules listIt has to be ordered from the material supplier at the start. See EN 10204 3.1 vs 3.2
Whether the item also needs a statutory approval for the ship's flagThe wheel mark or the UK conformity mark is a separate approval
The place of manufacture named on the certificate against where the unit will be builtApprovals can be tied to a factory

A layout for recording these points per order is on the class certificate checklist template page. The wider enquiry process is on the marine equipment manufacturers page.

Talk through your tender review

See how OdysseyGPT reviews a tender

Tell us how your team reviews tenders today. We can walk through an example together.

Book a call

Frequently asked questions

What is type approval in the marine industry?

A classification society's confirmation that a product design meets its rules, so the design can be used on many ships without a new design review for each one. The society lists approved products in a public register.

Does a type approved product still need a class certificate for each unit?

It can. Type approval covers the design. Where the society's rules require certification of each unit, a surveyor still attends the works test and a certificate is issued for the unit delivered.

How long does ABS type approval last?

ABS publishes five years for its product design assessment certificate, subject to design modifications and rule changes, and five years for its manufacturing assessment certificate, subject to annual plant audits. Check eagle.org for the current terms.

Is a DNV type approval accepted by other classification societies?

Not automatically. Each society approves under its own rules. DNV's published answers say a certificate from another society generally cannot replace a DNV certificate. Ask the society named in your enquiry what it accepts.

Where can I check whether a product is type approved?

In the register of the society concerned: DNV's Approval Finder, the ABS type approval database or the Lloyd's Register list of type approved products. A register entry is a summary. Conditions are on the certificate.

References

Certification of materials and components

DNV

Type approval, design approval and product certification at concept level. Read 15 Nov 2026.

Visit source

Certification of materials and components: frequently asked questions

DNV

Approval Finder excerpts, accredited laboratories, witnessed tests and other societies' certificates.

Visit source

Approval Finder help

DNV

The kinds of approval the register gives access to.

Visit source

Type approval procedure

American Bureau of Shipping

Design assessment, manufacturing assessment, the published validity periods and the database.

Visit source

Type approval: frequently asked questions

American Bureau of Shipping

Design review letter, unit certification and the limited categories.

Visit source

Type approval

Lloyd's Register

The list of type approved products and how it can be searched.

Visit source

About IACS

International Association of Classification Societies

Visit source

Related Pages