What is 3-A Sanitary Standards, Inc.?
3-A Sanitary Standards, Inc., usually written 3-A SSI, is a non-profit organisation in the United States that maintains sanitary design criteria for equipment and processing systems. The work began in the dairy industry in the 1920s. The name comes from the three groups that wrote the first standards together: regulatory sanitarians, equipment fabricators and processors.
Today 3-A SSI describes its membership as three associations, the International Dairy Foods Association, the Food Production Solutions Association and the International Association for Food Protection, together with representatives of the US Department of Agriculture and the Food and Drug Administration. The dairy origin still shows in the public list, which holds documents for milking and pasteurising equipment beside those for general items such as pumps, valves and tanks.
3-A documents are voluntary. An equipment maker meets them through a customer: a dairy or food producer in North America, or a multinational that writes 3-A into its corporate hygienic design standard for every site.
What is the difference between 3-A Sanitary Standards and 3-A Accepted Practices?
3-A SSI publishes two kinds of document, and a tender may cite either. When we read the public list it held 73 Sanitary Standards and 10 Accepted Practices. The count changes as documents are added and revised.
| 3-A Sanitary Standards | 3-A Accepted Practices | |
|---|---|---|
| Subject | One type of equipment each | A processing system made of several items |
| What they set | Criteria for materials, design and fabrication | The same kind of sanitary criteria, with installation criteria where they are needed |
| Examples from the public list | Pumps, tanks, heat exchangers, valves, fittings, filters, mixers, conveyors, sensors, and rubber and plastic materials | Pasteuriser systems, installation and cleaning in place of equipment and pipelines, culinary steam, spray drying and membrane systems |
| Numbering in the public list | A two-part number, such as 00-02 | A two-part number in a 600 series, such as 603-07 |
| Who it concerns most | The maker of the item | The system builder or installer, and the processor |
The split matters to a skid builder. A pump and a plate heat exchanger may each fall under their own standard, while the way they are piped, installed and cleaned in place falls under an accepted practice. Read the tender for which documents it names and against which part of your scope.
What does the 3-A Symbol mean?
The 3-A Symbol is a registered mark that 3-A SSI says was introduced in 1956. On equipment it shows that the model conforms to the 3-A standard for that type of equipment. A maker cannot apply it on its own judgement. It needs a 3-A Symbol authorisation, and 3-A SSI publishes the authorisations it has issued so that a buyer can look a maker and model up.
3-A SSI states that each authorised model is listed with the cleaning method it is recommended for: cleaned in place, cleaned out of place, or both. That detail belongs in your offer. A model listed for cleaning out of place does not answer a tender for a line that is never opened.
The Symbol covers equipment with its own standard. For other cases 3-A SSI describes separate certificates, including one for replacement parts and system components and a process certification for systems under an accepted practice. If a tender asks for "3-A certification" of something that is not a listed equipment type, ask which of these it means.
How does third party verification work?
Before 2003 a fabricator could declare conformity itself. Since then 3-A SSI has made a third party verification inspection, known as TPV, a condition of Symbol authorisation. The inspection is done by a Certified Conformance Evaluator, or CCE. 3-A SSI accredits these evaluators, but they are not its staff, and they may not have other business ties to the makers they inspect.
- The maker hires a CCE from the list 3-A SSI publishes.
- The CCE reviews the design documents and inspects representative finished equipment at the place of final manufacture.
- The CCE also looks at the plant's own controls and at how the maker proposes to show the Symbol.
- The CCE completes a report that marks each clause of the standard as conforming or not applicable. Deficiencies have to be corrected first.
- 3-A SSI reviews the report and, once it is accepted and the fees are paid, issues the authorisation and lists it.
3-A SSI's TPV manual describes renewal inspections at five-year intervals. 3-A SSI also advises a design review by a CCE before fabrication starts for complex machines such as fillers and homogenisers. Check the current rules with 3-A SSI before you plan an application around a tender date, since an inspection of finished equipment is unlikely to fit inside a bid period.
How does 3-A differ from EHEDG?
| 3-A | [EHEDG](/standards/ehedg-guidelines) | |
|---|---|---|
| Origin | United States dairy industry, 1920s | Europe, founded 1989 |
| Documents | Sanitary Standards for equipment types and Accepted Practices for systems | Numbered guidelines on principles, equipment types, cleaning and test methods |
| Mark of conformity | 3-A Symbol authorisation for a listed model | EHEDG certificate for an item, by type and class |
| How conformity is checked | Inspection of documents and equipment by an independent Certified Conformance Evaluator | Design review by an Authorised Evaluation Officer, with laboratory testing where the scheme calls for it |
| Cleaning method on the record | Model listed for cleaning in place, out of place or both | Class shows cleaning in place or dismantled, wet or dry |
| Legal status | Voluntary | Voluntary |
Many components carry both marks, and many corporate standards cite both. Where they do, list the two requirements on separate rows of your compliance matrix and give the evidence for each.
What to check in a tender that cites 3-A
| Check | Why it matters |
|---|---|
| Which 3-A documents are named, by number and revision | Each equipment type has its own standard, and revisions change the criteria |
| Whether the tender asks for the 3-A Symbol or for design "in accordance with" 3-A | The first needs an authorisation you either hold or do not. The second is a statement you make and must be able to support |
| Whether your model is on a current authorisation, and for which cleaning method | An authorisation covers the models it lists, not the product family |
| Which bought-in components must carry the Symbol | It limits the makes you can fit and may conflict with the preferred component list |
| Whether an accepted practice is cited for the system as a whole | Installation and cleaning-in-place criteria then apply to your pipework and layout, not only to components |
| Any item in your scope with no 3-A standard of its own | Ask what evidence the customer wants in its place |
| Elastomer and plastic requirements stated beside the 3-A reference | The customer may also want food contact statements for each material |
| Whether the tender also cites EHEDG, and which governs | The schemes are separate, and their criteria are not identical |
| The documents wanted: copies of authorisations, inspection reports or your own declaration | Authorisations for bought-in parts must be collected from their makers |
| Time to obtain an authorisation you do not hold | It needs an inspection of finished equipment, which does not fit a normal bid period |
OdysseyGPT's Document Review checks the customer's specification against your datasheets, fabrication standard and quality plan, and drafts the compliance matrix and deviation list with a quote from both sides on each row. Deviation Register (beta) keeps each 3-A exception through the clarification rounds to the customer's decision. For the wider sector, see food processing equipment manufacturers.
What OdysseyGPT does not do here
It reads the documents you upload and nothing else. It does not hold the 3-A documents, does not inspect equipment, does not read fabrication drawings and is not a Certified Conformance Evaluator. It cannot tell you whether a model is authorised: 3-A SSI's own listing is the place to check.
Talk through your tender review
See how OdysseyGPT reviews a tender
Tell us how your team reviews tenders today. We can walk through an example together.
