OdysseyGPT

Glossary term

Hygienic Design

The design of food processing equipment so that it can be cleaned effectively and gives soil, micro-organisms and foreign matter nowhere to collect.

Last reviewed by the OdysseyGPT team

What it is

Hygienic design means designing food processing equipment so that it can be cleaned effectively and does not contaminate the product. It covers materials, surface and weld finish, seals, joints and drainage in the areas that touch food. EHEDG guidelines, EN 1672-2, EN ISO 14159 and the 3-A Sanitary Standards give the criteria, and customers add their own.

Key Takeaways

  • The aim is equipment that can be cleaned and adds nothing to the product.
  • The criteria sit in several documents, and the customer's own standard usually governs.
  • The cleaning method drives how much of the design is needed.
  • For a supplier it becomes clauses on finish, seals, drainage and components, each needing evidence.

Why it matters

Hygienic design is the part of equipment design that deals with food safety. Its aim is equipment that can be cleaned to the level the process needs, in a reasonable time, and that does not itself add anything to the product. The ideas are simple to state. Surfaces that touch food are made of materials that resist the product and the cleaning chemicals and do not transfer anything harmful. They are smooth enough to clean and free of crevices, pits and open joints. Liquid drains away and does not stand in pockets or dead ends. Seals are designed so that product is not trapped behind them. Parts that cannot be cleaned where they sit can be reached or removed. Lubricants, condensate and dirt from outside the product zone are kept out of it. The detailed criteria are not found in one place. In Europe the EHEDG guidelines and the machinery standards EN 1672-2 and EN ISO 14159 are the usual references, and in the United States the 3-A Sanitary Standards. A food or beverage producer normally adds a corporate hygienic design standard of its own, which may be stricter than any of them. The level of design asked for depends on the product and the cleaning method: a line that is cleaned in place and never opened needs more of the design than a conveyor that is stripped and washed by hand every shift. For an equipment maker, hygienic design shows up as clauses on materials, surface and weld finish, seals, drainage, joints and certified components, and as the documents that prove each one. Read the figures in the edition of the document your contract names.

How OdysseyGPT uses it

Document Review sets the customer's hygienic design standard beside your datasheets, fabrication standard and quality plan and reports, row by row, where they agree, differ or are silent, with a quote from each side. Customer Specification Review (beta) lists every obligation in the customer's standard with its clause. OdysseyGPT reads written documents only. It does not assess whether a design is hygienic, read drawings, test cleanability or certify equipment, and engineers decide every status.

Evaluation questions

What does a customer specification usually say about hygienic design?

It names the references, defines the product-contact zone, and sets materials, surface and weld finish, seal materials, drainage and joint rules for that zone. It often lists preferred or certified components and the records wanted as proof.

Frequently asked questions

Is hygienic design the same as sanitary design?

In practice, yes. "Hygienic design" is the usual term in Europe and in EHEDG documents. "Sanitary design" is the usual term in the United States and in 3-A documents. A specification may use either, and it is the cited documents that set the detail.

Which standards define hygienic design?

There is no single one. The common references are the EHEDG guidelines, the European standards EN 1672-2 and EN ISO 14159, and the 3-A Sanitary Standards. Most food and beverage producers add their own corporate standard on top.

Does hygienic design apply to the whole machine?

Usually in degrees. Customer standards apply the strictest rules to surfaces in contact with product, lighter rules to areas where product may splash, and general good practice to the rest. Check how the customer's standard draws the zones.

Who decides whether equipment is hygienically designed?

The maker's design engineers first, then the customer's hygiene or engineering team at design review and acceptance. Where a component certificate or mark is required, an independent evaluator under the EHEDG or 3-A scheme has assessed that component.

References

EHEDG Guideline Catalogue

EHEDG

Guideline numbers and titles. Most guidelines are for members or for sale.

Visit source

About 3-A

3-A Sanitary Standards, Inc.

The organisation behind the United States sanitary design standards.

Visit source

EN 1672-2:2020 Food processing machinery. Basic concepts. Part 2: Hygiene and cleanability requirements

CEN (catalogue listing)

Paid standard. Catalogue entry used for the title and scope only.

Visit source

Related Pages