OdysseyGPT

Glossary term

Food Contact Declaration of Compliance

A written statement from a supplier that a material or part intended to touch food meets the food contact rules that apply to it, with the conditions under which that holds.

Last reviewed by the OdysseyGPT team

What it is

A food contact declaration of compliance is a supplier's written statement that a material or part intended to touch food meets the applicable food contact rules. In the European Union it stems from Regulation (EC) No 1935/2004 and is compulsory for plastics under Regulation (EU) No 10/2011. Customers often ask for one for every seal, hose and plastic part.

Key Takeaways

  • The declaration carries food contact information from the material maker to the food producer.
  • European law makes it compulsory where a specific measure exists, as for plastics.
  • Metals and rubber have no general European measure, so national rules and the contract decide.
  • A useful declaration names the part, the rules and the limits on food type, time and temperature.

Why it matters

A food contact declaration of compliance, often shortened to DoC, is the document that passes food contact information down the supply chain. A seal maker gives one to the valve maker, the valve maker to the skid builder, and the skid builder to the food producer. In the European Union the basis is Regulation (EC) No 1935/2004, the framework regulation on materials and articles intended to come into contact with food. It requires that such materials do not transfer their constituents to food in amounts that could endanger health or change the food unacceptably, and that they can be traced. Its Article 16 says that materials covered by a specific measure must be accompanied by a written declaration, backed by supporting documentation that is kept available for the authorities. Plastics are the main group with such a measure, Regulation (EU) No 10/2011, which makes a declaration of compliance a requirement. The European Commission lists no general specific measure for metals or for rubber, so for stainless steel and elastomers national rules may apply, and what a declaration should cite is less uniform. Great Britain applies its own assimilated versions of these regulations. In the United States there is no document with the same legal form. Suppliers usually give a written statement that a material complies with a named section of Title 21 of the Code of Federal Regulations, such as section 177.2600 on rubber articles intended for repeated use. A useful declaration identifies the part and the material, names the rules it claims, and states any limits on the type of food, the contact time and the temperature. Customers of equipment makers commonly ask for one for every non-metallic part in contact with product, whatever the legal minimum.

How OdysseyGPT uses it

OdysseyGPT has no dedicated tool for food contact declarations. Document Review can read declarations as documents and set what each one states beside the customer's documentation clause, quoting both. MRB Readiness Check (beta) reports which documents the customer's dossier index asks for are missing from your folder. OdysseyGPT does not judge whether a material is safe or suitable for a product, and it does not verify migration test results. Engineers decide.

Evaluation questions

What should an equipment maker check on a declaration?

That it identifies the actual part and material supplied, names the regulations the customer asked for, is dated and signed by the supplier, and states conditions of use that cover the customer's product, cleaning chemicals and temperatures.

Frequently asked questions

Is a declaration of compliance needed for stainless steel?

European law has no general specific measure for metals, so the framework regulation's written declaration duty does not apply to them in the way it does to plastics. National rules may apply, and many customers ask for a declaration by contract in addition to the material certificate.

Is a food contact declaration the same as a material certificate?

No. A material certificate, such as an EN 10204 type 3.1, reports the grade and test results of a batch of metal. A food contact declaration states that a material meets food contact rules. Product-contact steel often needs the first, and seals and plastics the second.

What is an FDA compliance statement for a seal?

It is the supplier's written statement that the material complies with a named section of Title 21 of the US Code of Federal Regulations, for example section 177.2600 for rubber articles intended for repeated use. Check that the section is named, not just "FDA compliant".

Who issues a food contact declaration?

The business that makes or supplies the material or part. An equipment maker collects declarations from its component suppliers and passes them on, and may add its own covering declaration for the assembled equipment if the contract asks for one.

References

Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food

EUR-Lex

Framework regulation. Articles 3, 6, 16 and 17 read.

Visit source

Food contact materials: legislation

European Commission

Which material groups have specific measures, and the plastics and GMP regulations.

Visit source

21 CFR 177.2600: Rubber articles intended for repeated use

US Government Publishing Office (eCFR)

The section most often named for elastomers in food equipment.

Visit source

Guidance on using the Register of Substances in Plastic Food Contact Materials

Food Standards Agency

Refers to the assimilated versions of Regulations 1935/2004 and 10/2011 in Great Britain.

Visit source

Related Pages