Glossary term
Thorough Examination
The systematic, detailed examination of lifting equipment by a competent person that LOLER requires of the user in Great Britain, followed by a written report.
Last reviewed by the OdysseyGPT team
What it is
A thorough examination is the systematic, detailed examination of lifting equipment that LOLER requires in Great Britain. A competent person carries it out and writes a report. It is needed before first use in most cases, after installation, at set intervals in service and after exceptional events. The user arranges it, not the manufacturer.
Key Takeaways
- It is the user's duty under LOLER, not the manufacturer's.
- A recent declaration of conformity can stand in before first use, but not for equipment assembled on site.
- The competent person decides whether any test is needed.
- The report must hold the information listed in Schedule 1 of the regulations.
Why it matters
Thorough examination is the term used in the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) for the formal check that lifting equipment is safe to keep in use. The Health and Safety Executive describes it as a systematic and detailed examination of the equipment and its safety-critical parts, carried out by a competent person who then completes a written report. The duty to arrange it lies with whoever owns, operates or controls the equipment, not with the manufacturer. The regulations call for an examination at four points. The first is before first use, unless the equipment is new, has a declaration of conformity made within the previous 12 months and was not assembled on site. The second is after installation or re-assembly where safety depends on how the equipment is installed. The third is in service: at least every 6 months for equipment that lifts people and for lifting accessories, and at least every 12 months for other lifting equipment, unless a competent person has drawn up an examination scheme with different intervals. The fourth is after exceptional circumstances such as damage or a major modification. The law does not define a competent person. The Approved Code of Practice says they need the knowledge and experience to find defects and judge their importance, and should not be the person who routinely maintains the equipment. The report must contain the information in Schedule 1 of the regulations, including the identity of the equipment, its safe working load, any defect and the date of the next examination. A thorough examination is not the same as maintenance or as the user's routine inspections. This entry is an overview and not legal advice.
How OdysseyGPT uses it
OdysseyGPT does not carry out a thorough examination and is not a competent person. It reads documents. For a manufacturer, Document Review can compare a British buyer's documentation clauses with your standard document list and quote the clauses your list does not answer, such as a request for a recent declaration of conformity or a test record by serial number. VDRL/MDR Tracker (beta) turns the order's document requirements into a register with due dates.
Evaluation questions
What is in a thorough examination report?
The information in Schedule 1 of LOLER. It includes the employer and premises, the identity of the equipment, its safe working load, the date, any defect, any test, the latest date for the next examination and the examiner's details.
Is a thorough examination the same as an inspection?
No. Inspections are routine checks between examinations, often by operators or maintenance staff. A thorough examination is the formal one by a competent person with a statutory report.
What does the examiner need from the manufacturer?
The declaration of conformity, the instructions, the rated load for each configuration, the serial number and date of manufacture, and the records of tests already carried out.
Frequently asked questions
What is a thorough examination?
A systematic and detailed examination of lifting equipment and its safety-critical parts by a competent person, who then makes a written report. LOLER requires it of the user in Great Britain.
How often must lifting equipment be thoroughly examined?
At least every 6 months for equipment that lifts people and for lifting accessories, and at least every 12 months for other lifting equipment, unless an examination scheme sets other intervals.
Who can carry out a thorough examination?
A competent person: someone with the practical and theoretical knowledge and experience to detect defects and assess them, who is impartial and does not routinely maintain the equipment.
Is a thorough examination needed before first use?
Yes, unless the equipment is new, has a declaration of conformity made within the previous 12 months and was not assembled on site. An installed crane needs one before it is used.
References
Thorough examination of lifting equipment
Health and Safety Executive
Definition, the competent person, when an examination is needed, intervals, testing and records. Read 15 Nov 2026.
The Lifting Operations and Lifting Equipment Regulations 1998 (SI 1998/2307)
legislation.gov.uk
Regulations 9 to 11 and Schedule 1, in the version as made.
Safe use of lifting equipment. Approved Code of Practice and guidance (L113)
Health and Safety Executive
