OdysseyGPT

Glossary term

Load Test Certificate

A signed record that a named crane, hoist or lifting device was tested with stated loads on a stated date, with the result.

Last reviewed by the OdysseyGPT team

What it is

A load test certificate is a signed record that one identified crane, hoist or lifting device was tested with stated loads on a stated date. It gives the serial number, rated capacity, the tests done, the loads applied and the result. Buyers ask for it with the declaration of conformity and the instructions.

Key Takeaways

  • The certificate belongs to one item, identified by serial number.
  • It should state the loads, the tests, the date, the result and the signatory.
  • It is not a declaration of conformity and not a thorough examination report.
  • For an erected crane, check whether it covers the hoist or the whole crane.

Why it matters

A load test certificate records that one identified piece of lifting equipment was loaded under controlled conditions and behaved as required. It is evidence about a single item, tied to it by serial number. A useful certificate states who made the equipment and what it is, its serial number and rated capacity, the configuration tested, the tests carried out and the load applied in each, the date and place, the result, and the name and signature of the person responsible. Where a load cell or calibrated weights were used, their identity and calibration belong on the record too. The reason for the test depends on the rules in force. The EU Machinery Directive has extra requirements for machinery that lifts loads. They include static and dynamic tests and a check, before the machine is first put into service, that it is fit for purpose. Product standards for each type of crane say how the tests are done, and the American standards have their own test provisions. Customers add to this in the contract: a witnessed test, an overload test after erection on site, or a particular certificate format. Three documents are often confused with it. A declaration of conformity is the maker's statement that the product meets the law. A thorough examination report is the user's competent person's report under LOLER in Great Britain. A calibration certificate belongs to the instrument used in the test. A buyer may ask for all of them. For a crane erected on the customer's runway, check whether the certificate covers the hoist unit as tested in the works or the whole crane as tested on site, because these are different tests.

How OdysseyGPT uses it

OdysseyGPT does not carry out, witness or validate a load test. It reads the documents around one. Document Review can compare the customer's testing clauses with your test procedure and quote where they differ. FAT Readiness Check (beta) reviews whether the procedure, calibration evidence and open non-conformances are in order before a witnessed test. Calibration Validity Check (beta) matches instruments named on a test report to their calibration certificates. An engineer decides what each finding means.

Evaluation questions

What should a load test certificate contain?

The maker, a description and the serial number, the rated capacity, the configuration tested, each test and its load, the date and place, the result, the instruments or weights used, and a name and signature.

Is the test done at the works or on site?

It depends on the equipment and the order. A hoist or lifting beam can be tested in the works. A crane that is erected on the customer's runway is tested there, because its safety depends on the installation.

Can OdysseyGPT confirm a load test was done correctly?

No. It reads what the certificate and the procedure say and reports differences from the order. It cannot confirm what happened during the test.

Frequently asked questions

What is a load test certificate?

A signed record that a named piece of lifting equipment was tested with stated loads on a stated date. It identifies the item, its rated capacity, the tests done and the result.

Who issues a load test certificate?

The party that carried out the test: usually the manufacturer for a works test, or the manufacturer, installer or a testing company for a test after erection. The contract should say who.

Is a load test certificate the same as a thorough examination report?

No. The certificate records a test. A thorough examination report is the written report of a competent person under LOLER, and it may or may not include a test.

Does lifting equipment need a load test every year?

Not as a rule in Great Britain. HSE says most lifting equipment does not need routine testing as part of a thorough examination, and the competent person decides. Other countries and contracts differ.

References

Directive 2006/42/EC on machinery

EUR-Lex

Annex I, part 4: supplementary requirements for machinery that lifts loads, including tests and fitness for purpose.

Visit source

Thorough examination of lifting equipment

Health and Safety Executive

HSE's position on testing as part of a thorough examination.

Visit source

The Lifting Operations and Lifting Equipment Regulations 1998 (SI 1998/2307)

legislation.gov.uk

Schedule 1 lists the details of any test among the contents of an examination report.

Visit source

Related Pages