Glossary term
First Article Inspection Report
The record of a first article inspection: evidence that one representative part from the first production run was checked against every design requirement. In aerospace it follows AS9102.
Last reviewed by the OdysseyGPT team
What it is
A first article inspection report records the check of one representative part from the first production run against every design requirement. In aerospace it follows AS9102 and has three forms, for the part number, for materials, special processes and functional tests, and for each characteristic. It shows the process works. It does not inspect later parts.
Key Takeaways
- FAI is the inspection. FAIR is the record.
- The report accounts for every characteristic, including drawing notes.
- Certificates for materials and special processes sit behind the forms.
- A change or a long gap in production calls for a partial or full repeat.
Why it matters
A first article inspection report, or FAIR, is the document set that records a first article inspection. The inspection takes one representative part from the first production run and verifies it against every requirement of the design: each dimension and tolerance, each drawing note, the material, the special processes and any functional test. In aerospace and defence the report follows AS9102, which lays it out as three forms. The first accounts for the part number and, for an assembly, the parts within it. The second accounts for materials, special processes and functional tests, and points to the certificates and reports that prove each one. The third lists every design characteristic with its requirement and its result. The lines of the third form are normally keyed to a ballooned drawing, a copy of the drawing with each characteristic numbered. Behind the forms sit the supporting records: material certificates, special process certificates, test reports and any non-conformance record. The report is signed by the supplier, and some customers require their own representative to approve it. What the report shows is limited and worth stating. It shows that the production process made one conforming part at one time. It does not inspect later parts, and it stops being valid for a characteristic when the design, the process, the source or the location changes. Then a partial or full inspection is done again. Other industries use the same idea under other names and other formats.
How OdysseyGPT uses it
OdysseyGPT does not produce a first article inspection report. It does not read drawings or 3D models, balloon a drawing or measure a part, and it is not FAI software. It can check documents around the report. Material Certificate Review (beta) checks the material certificates against the purchase requirements. Calibration Validity Check (beta) matches instruments named in a report to their calibration certificates. Document Review compares the customer's first article clause with your procedure.
Evaluation questions
What makes a customer reject a first article inspection report?
Common reasons are a revision that does not match the order, a characteristic or drawing note with no result, a missing material or special process certificate, a processor the customer has not approved, and a missing signature.
Frequently asked questions
What does FAIR stand for?
First article inspection report. FAI is the inspection itself, and FAIR is the record of it.
Who signs a first article inspection report?
The supplier's authorised people sign it. Some customers also require their own quality representative to review or approve it before parts ship. The quality clause on the order says which.
How long is a first article inspection report valid?
Until something changes. A change to the design, the process, the source or the location, or a long gap in production, calls for a partial or full repeat. Customers' clauses set the detail.
References
AS9102C: Aerospace Series. First Article Inspection Requirements
SAE International
Paid standard. Publisher's listing used for the title, revision and date. No form content is reproduced.
First Article Inspections
L3Harris
A public example of how a customer applies AS9102 to its suppliers.
