OdysseyGPT

Standards explainer

ISA-20 instrument specification forms: what they are and how instrument datasheets are used in a tender

For bid and application engineers at instrument makers: what the ISA-20 forms are, how they relate to ISA-TR20.00.01, and what to check on a customer's instrument datasheet before you quote.

By Ademola Afolabi, Founder, New Odyssey Ltd · Last reviewed:

The short answer

ISA-20 is a set of specification forms from the International Society of Automation for process measurement and control instruments, primary elements and control valves. Each form is a fill-in datasheet that lists the main details needed to specify one instrument. In a tender, the completed datasheet is the buyer's requirement for each tag.

Key Takeaways

  • ISA-20 gives standard fill-in forms for specifying instruments. It does not set performance requirements.
  • The 1981 forms are short check sheets. ISA-TR20.00.01 is the later, longer set.
  • Many owners use their own datasheet templates that follow the ISA layout.
  • In a tender, each datasheet is one tag's requirement. Blanks and conflicts with the specification need a clarification.

See how OdysseyGPT reviews a tender. Tell us how your team reviews tenders today. We can walk through an example together. Book a call

What are the ISA-20 specification forms?

ISA-20 is the common name for ISA-20-1981, Specification Forms for Process Measurement and Control Instruments, Primary Elements, and Control Valves. It is a collection of blank forms. Each form covers one type of device, such as a pressure instrument, a temperature instrument or a control valve, and gives numbered lines for the details a buyer and a supplier need to agree.

The ISA20 committee states its aim as promoting uniformity of instrument specifications, in both content and form. ISA lists the benefits of using the forms: they help the engineer prepare a complete specification, they promote uniform terminology, they make quoting, purchasing, receiving and ordering easier, and they give a permanent record of what was installed.

The forms do not set technical requirements. A form has a line for accuracy; it does not say what the accuracy must be. The requirement comes from what the engineer writes on the line, and from the project specification behind it.

ISA-20-1981 and ISA-TR20.00.01

The two ISA form sets (own summary of public catalogue descriptions)
DocumentWhat it isWhat to know
ISA-20-1981The original set of short-form specifications, which its own scope calls check sheetsStandards resellers list it as withdrawn. The forms are still in wide use, and ISA still sells them in spreadsheet format
ISA-TR20.00.01A technical report, Specification Forms for Process Measurement and Control Instruments, Part 1: General Considerations, with a much larger set of formsFirst issued in 2001 and extended with new forms in later updates. ISA also publishes picklists of standard entries for the forms

Catalogue descriptions say the technical report's forms go beyond the limits of the 1981 sheets, and that further forms were added in later updates. Check ISA's catalogue for the current issue before you cite a year.

In practice you will meet three things in an enquiry: a true ISA form, an owner or contractor template that follows the ISA layout, and an export from an instrument database. All three do the same job. When a tender says "ISA datasheet", confirm which form set and which revision the customer means only if you are asked to return your data on it.

What an instrument datasheet holds

Typical blocks on an instrument datasheet (general practice, not a copy of any ISA form)
BlockTypical entriesWho fills it in
IdentificationTag number, service description, P&ID and line or equipment reference, quantityBuyer
Process conditionsFluid, state, pressure, temperature and flow at minimum, normal and maximum, density and viscosityBuyer
MeasurementRange, calibrated span, accuracy, response timeBuyer, confirmed by supplier
Output and powerSignal type, communication protocol, supply voltageBuyer, confirmed by supplier
ConstructionProcess connection, wetted materials, housing material, ingress protectionBuyer states needs; supplier states what is offered
Area and approvalsHazardous area classification, protection concept, certification scheme, any SIL requirementBuyer
Options and accessoriesManifolds, seals, displays, mounting hardware, taggingEither
Purchase dataManufacturer, model code, notes and revision historySupplier

Tag numbers on datasheets normally follow the identification rules of ANSI/ISA-5.1, the ISA standard for instrumentation symbols and identification. The tag is the key that ties the datasheet to the instrument index and to the P&ID. See instrument datasheet and instrument index for both terms.

How instrument datasheets are used in a tender

  1. The buyer issues a requisition with an instrument index or tag list, a datasheet for each tag or group of tags, and the project instrument specification.
  2. The supplier selects a model for each tag and completes the supplier lines of each datasheet, or returns its own datasheet beside the buyer's.
  3. The supplier checks each datasheet against the specification and lists what it cannot meet as deviations and what is unclear as clarifications.
  4. The buyer compares the returned datasheets across bidders in a technical bid evaluation.
  5. After the order, the agreed datasheet becomes a controlled document. It is revised when anything changes and is checked again at inspection and at handover.

The datasheet and the specification often disagree. The datasheet may show one wetted material and the specification another, or the specification may require a certification scheme the datasheet does not mention. The order of precedence in the enquiry says which wins. If it does not, ask. Do not pick the cheaper reading and stay silent.

What to check on an instrument datasheet in a tender

Instrument datasheet checks before you quote
CheckWhy it matters
Every tag in the index has a datasheet, and every datasheet has a tag in the indexA missing sheet is an unpriced instrument
Datasheet revision matches the revision listed in the requisitionQuoting to a superseded sheet is a common cause of rework
Process conditions are complete at minimum, normal and maximumA blank maximum pressure or temperature cannot be sized against
Units are stated and consistent across sheetsGauge and absolute pressure are easily confused
Range, span and accuracy against the specification's general requirementsThe specification may be tighter than the sheet
Wetted materials against the fluid and any sour-service clauseMaterial changes alter the model code and the certificates
Hazardous area classification, protection concept and certification schemeThe certificate must match the scheme the site accepts
SIL requirement, if the tag is part of a safety functionEvidence and a safety manual will be requested; see IEC 61508 and IEC 61511
Signal and protocol versionA protocol mismatch is found late, at integration
Calibration and certificate requirements for each tagCertificates per instrument add cost and lead time
Notes at the foot of the sheetNotes often carry the requirements that differ from the standard form

Datasheet Comparison (beta) checks the buyer's datasheet against yours field by field and lists each material difference with the cell it came from. Document Review checks your datasheets against the written requirements in the project specification and quotes the clause for each finding. OdysseyGPT reads datasheets as text and tables. It does not read P&IDs or loop drawings, and it does not select or size instruments.

Talk through your tender review

See how OdysseyGPT reviews a tender

Tell us how your team reviews tenders today. We can walk through an example together.

Book a call

Frequently asked questions

What is an ISA datasheet?

An instrument datasheet laid out on an ISA specification form, or on a company template that follows the same layout. It lists the tag, the process conditions and the required features of one instrument.

Is ISA-20 a mandatory standard?

No. It is a set of forms that promotes a uniform way to write instrument specifications. A project makes the forms a requirement only if its documents say so. Many owners use their own templates.

What is the difference between ISA-20 and ISA-TR20.00.01?

ISA-20-1981 is the original set of short specification forms. ISA-TR20.00.01 is a later technical report with a larger set of more detailed forms that goes beyond the limits of the 1981 sheets.

Who fills in an instrument datasheet?

The buyer's instrument engineer fills in the identification, process conditions and required features. The supplier adds the manufacturer, model and offered details. After the order, both sides work from the agreed revision.

Does OdysseyGPT create ISA datasheets?

No. It reads the datasheets and specifications you upload and reports differences and unmet requirements with a quote for each. Your engineers complete the datasheets and decide every status.

References

ISA20 committee: Instrument Specification Forms

International Society of Automation

Committee purpose and the stated benefits of the forms.

Visit source

ISA-20-1981 specification forms in Excel format

International Society of Automation

Visit source

ISA-TR20.00.01 catalogue entry

ANSI Webstore

Paid document. Title and update history only.

Visit source

ISA-20 catalogue entry

GlobalSpec

Scope description and status.

Visit source

ANSI/ISA-5.1 Instrumentation Symbols and Identification

International Society of Automation

Paid standard.

Related Pages