Glossary term
Calibration Certificate
A document from a calibration laboratory that records how one identified instrument compared with a reference standard on a stated date.
Last reviewed by the OdysseyGPT team
What it is
A calibration certificate is a document from a calibration laboratory that records one calibration of one identified instrument. It states the date, the method, the measured results with their uncertainty, and how the reference used traces to national or international standards. It reports results; the instrument's owner decides whether it is fit for use.
Key Takeaways
- One certificate covers one identified instrument on one date.
- ISO/IEC 17025 sets what an accredited laboratory's certificate must report.
- The owner of the instrument, not the laboratory, normally sets the recalibration due date.
- A test report is only as good as the certificates behind the instruments it names.
Why it matters
A calibration certificate is the record of one calibration of one instrument. The laboratory compares the instrument's readings with a reference of known accuracy and writes down what it found. A typical certificate identifies the laboratory and the customer, identifies the instrument by description, make, model and serial or asset number, gives the calibration date and the issue date, states the method and the conditions, lists the results at each point with their measurement uncertainty, and shows how the reference traces back to national or international standards. Many certificates give both as-found results, taken before any adjustment, and as-left results, taken after. ISO/IEC 17025 is the standard that sets requirements for the competence of calibration laboratories, including what a certificate must report. A laboratory accredited to it issues certificates bearing its accreditation body's mark for the calibrations inside its scope. Under ISO/IEC 17025 the laboratory does not recommend a calibration interval on the certificate unless the customer has agreed to it. The owner of the instrument sets the due date. A certificate also differs from a certificate of conformance: it reports measured results and does not, on its own, declare that the instrument is fit for a particular test.
How OdysseyGPT uses it
OdysseyGPT does not calibrate instruments, does not issue calibration certificates and is not calibration management software. Calibration Validity Check (beta) reads your inspection and test reports, lists each instrument they name and matches it to its certificate by identity. It then checks that the certificate was valid on the date of use, covers a suitable range and shows traceability. Each finding quotes the report and the certificate. Your quality engineers decide whether a test stands.
Evaluation questions
What do as-found and as-left mean on a calibration certificate?
As-found results are the readings before any adjustment. As-left results are the readings after adjustment. As-found results outside tolerance mean that tests made with the instrument since its last calibration may need review.
Does a customer always need an accredited calibration certificate?
No, it depends on the contract. Some customers accept certificates from the manufacturer's own calibration function with stated traceability. Others require a laboratory accredited to ISO/IEC 17025. Check the specification and the inspection and test plan.
Does OdysseyGPT issue or manage calibration certificates?
No. It reads certificates and test reports you upload and reports instruments whose certificates are missing, expired on the test date, out of range or untraceable. It does not schedule calibrations.
Frequently asked questions
What is a calibration certificate?
A record of one calibration of one instrument. It identifies the instrument, gives the date, and reports how its readings compared with a reference standard, with the measurement uncertainty and the traceability of the reference.
What does a calibration certificate contain?
Usually the laboratory and customer, the instrument's identity, the calibration date, the method and conditions, the results with uncertainty, a traceability statement and an authorising signature. Accredited certificates also carry the accreditation mark.
Does a calibration certificate have an expiry date?
Not by default. Under ISO/IEC 17025 the laboratory gives a calibration interval only if the customer agreed to it. The instrument's owner sets the due date in its own calibration system, and many customers' specifications set a maximum interval.
Is a calibration certificate the same as a certificate of conformance?
No. A calibration certificate reports measured results for one instrument. A certificate of conformance is a supplier's declaration that a product meets stated requirements.
References
ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories
ISO / IEC
Paid standard.
LAB 5: Reporting calibration results
UKAS
SOP 1: Preparation of calibration certificates
NIST
Common calibration certificate findings
A2LA
