Glossary term
Instrument Datasheet
A one- or two-page specification for a single instrument tag, giving its process conditions, required features and, once offered, the manufacturer and model.
Last reviewed by the OdysseyGPT team
What it is
An instrument datasheet is a short specification for one instrument tag. The buyer states the service, process conditions and required features, such as range, materials, signal and hazardous area certification. The supplier adds the manufacturer, model and offered values. It is a controlled, revised document, often laid out on an ISA specification form.
Key Takeaways
- One datasheet per tag, or per group of identical tags.
- The buyer fills in the requirement; the supplier fills in the offer.
- It works together with the project instrument specification.
- Check the revision before you quote against it.
Why it matters
An instrument datasheet, also called an instrument specification sheet, describes one instrument or a group of identical ones. The buyer's engineer starts it and the supplier finishes it. The buyer's part identifies the tag and its service, gives the process conditions at minimum, normal and maximum, and states what is required: range, accuracy, output signal, power supply, process connection, wetted and housing materials, ingress protection, hazardous area certification and any functional safety requirement. The supplier's part names the manufacturer and the full model code and confirms or corrects the offered values. The layout often follows the ISA-20 specification forms or the later ISA-TR20.00.01 forms, or a company template based on them, with numbered lines so that a comment can point to a line. A datasheet is a controlled document with a revision history. It is issued for enquiry, revised for purchase and revised again as built. It sits under the project instrument specification, which holds the general requirements that apply to every tag. The two can disagree, and the enquiry's order of precedence says which one governs. A manufacturer's catalogue datasheet is a different thing: it describes a product range and is not tied to a tag.
How OdysseyGPT uses it
OdysseyGPT reads datasheets as text and tables. Datasheet Comparison (beta) compares a baseline datasheet with one or more others field by field, converts units where the conversion is exact and lists each material difference with the cell or row it came from. Document Review checks a datasheet against the written requirements of the customer's specification and quotes the clause for each finding. OdysseyGPT does not select or size instruments and does not read P&IDs. Engineers decide every status.
Evaluation questions
What should a supplier do about blank fields on an instrument datasheet?
Raise a clarification for any blank that affects selection or price, such as a maximum pressure or an area classification. If you must assume a value to quote, state the assumption in the offer.
Why do instrument datasheet revisions matter?
Process conditions and requirements change during a project. An offer or an inspection made against a superseded revision can be rejected, so the revision quoted should match the one in the requisition or order.
Can OdysseyGPT compare instrument datasheets?
Yes. It compares datasheets field by field and reports each material difference with its source cell. It does not judge whether an instrument is the right choice for the service.
Frequently asked questions
What is an instrument datasheet?
A short specification for one instrument tag. It gives the service, the process conditions, the required features and, once a supplier has offered, the manufacturer and model.
What information is on an instrument datasheet?
Tag and service, P&ID reference, process fluid and conditions, range and accuracy, signal and power, process connection, materials, enclosure rating, hazardous area certification, options, and the manufacturer and model code.
What is the difference between an instrument datasheet and an instrument specification?
The datasheet holds the requirements for one tag. The specification holds the general requirements for all instruments on the project. Both apply, and the order of precedence settles any conflict.
Is every instrument datasheet an ISA form?
No. Many follow the ISA-20 or ISA-TR20.00.01 forms, but owners and contractors often use their own templates or database exports with a similar layout.
References
ISA20 committee: Instrument Specification Forms
International Society of Automation
ISA-20-1981 specification forms in Excel format
International Society of Automation
What is an instrument index?
Automation Forum
How the index and the datasheets relate.
