OdysseyGPT

Standards explainer

API 617 compressors: scope, the purchaser's datasheet, shop tests and what to check in a tender

A plain-English overview of API 617 for bid and quality engineers at compressor makers and packagers, ending with a checklist for a compressor enquiry.

By Ademola Afolabi, Founder, New Odyssey Ltd · Last reviewed:

The short answer

API Standard 617 is the American Petroleum Institute standard for axial and centrifugal compressors and expander-compressors in petroleum, chemical and gas industry services. It sets minimum requirements for design, materials, inspection, testing and documents. The purchaser's datasheet fixes the duty, the options and the tests for each machine.

Key Takeaways

  • API 617 covers axial compressors, centrifugal compressors and expander-compressors for process service.
  • A general part applies to every machine. Further parts add rules for each machine type.
  • The purchaser's datasheet and its ticked options decide much of what you must supply.
  • Some shop tests come with every machine. Others are run only when the purchaser specifies them.

See how OdysseyGPT reviews a tender. Tell us how your team reviews tenders today. We can walk through an example together. Book a call

What is API 617?

API Standard 617 is titled Axial and Centrifugal Compressors and Expander-compressors. It gives minimum requirements for these machines in petroleum, chemical and gas industry services that handle air or gas. It is a purchase specification as much as a design standard: it is written so that an owner and a compressor maker can agree one machine by filling in datasheets and choosing options.

Published summaries list three kinds of machine it does not cover: fans, axial-inflow hot gas expanders, and packaged integrally geared centrifugal compressors for plant and instrument air. API has other standards for fans and for packaged air compressors. If an enquiry names API 617 for a machine of one of these kinds, ask which standard the customer means before you quote.

Resellers listed the ninth edition, dated April 2022, as the active edition when we checked in November 2026. Long projects often name an older edition. Use the edition your contract names, and say so on the first page of your compliance statement.

How the standard is arranged

API 617 is split into parts. The first part holds the rules shared by all machines. Each later part is read together with the first and adds the rules for one machine type.

The parts of API 617 in outline (own summary)
PartCoversWhat a bid engineer takes from it
Part 1General requirements for all machines in the standardShared rules for casings, rotating parts, materials, inspection, testing, preparation for shipment and vendor data
Part 2Centrifugal and axial compressors that are not integrally gearedRules for single-shaft process compressors, read with Part 1
Part 3Integrally geared centrifugal compressorsRules for machines with pinion shafts driven from one bull gear, read with Part 1
Part 4Expander-compressorsRules for an expander and compressor on one shaft, read with Part 1

The standard also carries annexes. Published summaries point to sample datasheets and to guidance on allowable nozzle loads among them. A compliance statement should say which parts apply to the machine offered, because a clause number means little without its part.

What the purchaser's datasheet fixes

API machinery standards leave many decisions to the purchaser. The clauses that need a decision are marked in the text, and the answers are recorded on the datasheet or in the requisition. For a compressor, the datasheet is where the customer states the duty and ticks the options. A bid engineer should treat every ticked option as a requirement and every blank as a question.

What a compressor datasheet usually fixes
AreaWhat the customer statesWhy it matters to the offer
Operating casesGas composition, inlet and discharge conditions and flow for each case, and which case is guaranteedThe guarantee point sets the aerodynamic design and the performance test basis
Gas properties and contaminantsMolecular weight range, corrosive or sour components, liquids or solids in the gasDrives materials, seals and washing or coating provisions
Site and utilitiesAmbient range, area classification, cooling water, power and instrument airSets driver sizing, cooler duty and electrical certification
Driver and trainMotor, steam turbine or gas turbine, gear unit, coupling type and who supplies eachSplits scope between you, the driver maker and the packager
Shaft sealsSeal type and the sealing system that supports itSeal gas panel scope is a frequent source of clarifications
MaterialsCasing, impeller and shaft materials, and any sour-service requirementA material upgrade changes price and lead time
Analyses and studiesRotor dynamic and other studies the customer wants reportedEach study is engineering time and a deliverable
Inspection and testingWhich tests are required, which are witnessed or observed, and any optional testsSets test bay time, test gas, notice periods and cost

Shop tests in outline

Compressor shop tests fall into two groups. The first group is run on every machine built to the standard. The second group is run only when the purchaser asks for it on the datasheet. The table gives the usual split as trade publications describe it. Confirm it against the edition and part that your contract names, because the list has changed between editions.

Compressor shop tests at concept level (own summary; no acceptance values are given)
TestWhat it showsUsual status
Hydrostatic test of pressure casingsThe casing holds pressure without leakingRun on every machine
Impeller overspeed testEach impeller withstands a speed above its maximum continuous speedRun on every impeller
Mechanical running testThe assembled machine runs at speed with acceptable vibration and bearing temperaturesRun on every machine
Assembled compressor gas leakage testThe assembled casing and its joints are gas-tightRun on every machine
Performance testHead, flow and power at the guarantee point, usually to ASME PTC 10When specified
Complete unit or string testCompressor, driver, gear and auxiliaries run togetherWhen specified
Full-load, full-pressure or full-speed testBehaviour at or near site conditions, including rotor stabilityWhen specified
Sound level test and post-test inspectionNoise against the limit, and the condition of internals after runningWhen specified

ASME PTC 10 describes two kinds of performance test. A Type 1 test uses the specified gas at conditions close to the guarantee point. A Type 2 test uses a substitute gas when the real gas is impractical or unsafe on a test stand, and converts the results. Which type the customer expects changes the test loop, the test gas and the price, so state it in the offer.

Witnessed, observed or by certificate

Each test on the datasheet also carries an attendance level. A witnessed test is a hold point: the test waits for the customer. An observed test goes ahead on the notified date whether or not the customer attends. Record the level for each test in your compliance statement, with the notice period you can meet.

What to check in a tender against API 617

Compressor enquiry checks before you quote
CheckWhy it matters
Edition of API 617 named, and which parts apply to the machineClause numbers and test lists differ between editions and parts
Guarantee case identified among the operating casesA second guaranteed case can change the staging or the driver
Gas composition and its range, including sour or corrosive componentsSets materials and may add sour-service evidence
Every ticked option on the datasheet, and every blankA ticked option is a requirement; a blank needs a clarification
Optional tests specified: performance, string, full-load, soundEach one adds test bay time and may need a test gas loop
Performance test type and test gasA Type 1 test with the real gas may not be possible on your stand
Attendance level for each test, with notice periodsHold points set the delivery date
Scope split for driver, gear, seal system, lube console and controlsUnclear splits become claims after the order
Studies and reports the customer wants, with submission datesThey are deliverables on the vendor document list
Owner specification clauses that add to or change the standardThese are where most deviations come from

OdysseyGPT's Document Review compares the customer's compressor specification and requisition with your own base documents, in both directions, and drafts a compliance matrix and deviation list. Each row quotes the clause it came from. Datasheet Comparison (beta) sets the customer's datasheet beside yours field by field. OdysseyGPT reads documents. It does not run rotor dynamic studies or tests, and your engineers decide every status.

Talk through your tender review

See how OdysseyGPT reviews a tender

Tell us how your team reviews tenders today. We can walk through an example together.

Book a call

Frequently asked questions

What does API 617 cover?

Axial compressors, centrifugal compressors (single-shaft and integrally geared) and expander-compressors for petroleum, chemical and gas industry services. It sets minimum requirements for design, materials, inspection, testing and vendor data.

Is a performance test mandatory under API 617?

It is generally described as a test run when the purchaser specifies it, unlike the mechanical running test, which is run on every machine. Many owners specify it anyway. Check the datasheet and the edition your contract names.

What is the API 617 mechanical running test?

A shop test in which the assembled compressor is run at speed while vibration, bearing temperatures and other mechanical readings are recorded. It proves the machine runs acceptably. It does not prove the aerodynamic performance.

What is the difference between API 617 and API 672?

API 617 covers process axial and centrifugal compressors and expander-compressors. API 672 covers packaged integrally geared centrifugal air compressors, such as plant and instrument air units. The enquiry should name the one that fits the machine.

Which edition of API 617 should we quote to?

The edition the contract names. Resellers listed the ninth edition, dated 2022, as active in November 2026, but project specifications often fix an earlier one. State the edition in your compliance statement.

References

API Standard 617: Axial and Centrifugal Compressors and Expander-compressors

American Petroleum Institute

Paid standard. Buy the edition your contract names from API or a reseller.

API standards catalogue

American Petroleum Institute

Visit source

What is API 617? Its importance and applications

Piping and Interface

Scope, exclusions, edition and annexes in summary.

Visit source

Centrifugal compressors shop tests

Turbomachinery International

Mechanical run, PTC 10 Type 1 and Type 2, and full-load string tests.

Visit source

Performance and mechanical running tests of centrifugal compressors, part I

Turbomachinery International

Visit source

Overspeed impeller testing

Turbomachinery International

Visit source

ASME PTC 10: Performance Test Code on Compressors and Exhausters

ASME

Paid code.

Related Pages