OdysseyGPT

Glossary term

TEMA Standards

The standards of the Tubular Exchanger Manufacturers Association for the mechanical design and construction of shell-and-tube heat exchangers.

Last reviewed by the OdysseyGPT team

What it is

The TEMA Standards are published by the Tubular Exchanger Manufacturers Association and cover the mechanical design and construction of shell-and-tube heat exchangers. They define classes R, C and B and a three-letter type designation for the front head, shell and rear head. They are used alongside a pressure code such as ASME Section VIII.

Key Takeaways

  • TEMA covers shell-and-tube exchangers, alongside a pressure code.
  • Classes R, C and B set the level of mechanical requirement.
  • The three-letter type names the front head, shell and rear head.
  • A class or type that differs from the datasheet belongs on the deviation list.

Why it matters

TEMA is the Tubular Exchanger Manufacturers Association, a trade association of shell-and-tube heat exchanger manufacturers. Its Standards cover the mechanical design, fabrication tolerances, installation and maintenance of shell-and-tube exchangers, and they are used alongside a pressure code such as ASME Section VIII. Two ideas from the Standards appear on almost every exchanger datasheet. The first is the class: R, generally for the severe requirements of petroleum and related processing; C, generally for the moderate requirements of commercial and general process use; and B, for chemical process service. The second is the three-letter type designation, in which the letters stand for the front head, the shell and the rear head, as in AES or BEM. TEMA has published a 2026 edition. A tender should name the edition and the class, and the offer should match both or list the difference.

How OdysseyGPT uses it

Document Review checks the customer's exchanger specification and datasheet against your own datasheet and standard specification. A TEMA class or type that differs between the two appears as a row with both sources quoted. OdysseyGPT does not hold the TEMA Standards, does not do thermal rating or mechanical design, and does not read drawings.

Evaluation questions

What should I check about TEMA in a tender?

The edition, the class and the type on the datasheet, and any owner requirement that goes beyond the class named. If your standard design is a different class or type, list it as a deviation with its justification.

Is TEMA a pressure vessel code?

No. It is an industry standard used with a pressure code. The pressure parts of the exchanger are still designed, inspected and certified under the code the contract names.

Frequently asked questions

What does TEMA stand for?

The Tubular Exchanger Manufacturers Association. It publishes the TEMA Standards for the mechanical design and construction of shell-and-tube heat exchangers.

What are TEMA classes R, C and B?

Three levels of mechanical requirement. Class R is generally for petroleum and related processing, class C for commercial and general process use, and class B for chemical process service. The datasheet names the class.

What does a TEMA type such as AES mean?

Three letters for the front head type, the shell type and the rear head type. AES, for example, names a removable-cover channel, a one-pass shell and a floating head with a backing device.

What is the difference between TEMA and API 660?

TEMA is the manufacturers' association standard for shell-and-tube exchangers in general. API 660 is the petroleum industry standard for the same equipment, and it adds requirements. Refinery tenders often call up both.

References

TEMA Standards

Tubular Exchanger Manufacturers Association

Paid standard. Read 15 Nov 2026.

Visit source

Related Pages