OdysseyGPT

Glossary term

Shop Drawing Submittal

A submittal of drawings, diagrams and schedules prepared for one project by the contractor, a fabricator or a manufacturer, showing how a specific part of the work will be made and fitted.

Last reviewed by the OdysseyGPT team

What it is

A shop drawing submittal is a set of drawings, diagrams and schedules prepared for one project by a manufacturer, fabricator or contractor to show how a part of the work will be made and installed. It differs from product data, which is standard catalogue material. For equipment it usually includes arrangement, anchorage and wiring drawings.

Key Takeaways

  • Shop drawings are project-specific. Product data is standard published material.
  • For equipment they show dimensions, weights, anchorage, connections and wiring.
  • They do not change the contract. A difference from the specification must be flagged.
  • Manufacture normally waits for approved shop drawings, so they set the delivery date.

Why it matters

A shop drawing submittal contains drawings made for the project in hand. That is the difference from product data, which is standard printed material such as catalogue pages and datasheets marked up to show the model offered. The US federal guide specification for submittal procedures describes shop drawings as drawings, diagrams and schedules specifically prepared to illustrate some portion of the work, and includes diagrams and instructions from a manufacturer or fabricator that help the contractor fit the product into the project. For water and wastewater equipment a shop drawing submittal typically includes a general arrangement with dimensions and weights, anchor bolt locations and loads, nozzle and connection details, a bill of materials, motor and instrument lists, and wiring and control diagrams for any panel supplied. The engineer uses it to check the equipment against the structure, the piping and the electrical design. The contractor uses it to set foundations and order connecting materials, and other trades coordinate from it. Shop drawings are the maker's reading of the contract documents, and they do not replace them. The reviewer's stamp usually says so. If a shop drawing shows something that differs from the specification, the difference has to be flagged on the drawing or in the transmittal. The specification section normally asks for shop drawings to be approved before manufacture starts, so a late or returned drawing moves the delivery date.

How OdysseyGPT uses it

OdysseyGPT does not read drawings, so it does not check a general arrangement, a wiring diagram or a dimension. Document Review checks the text documents that travel with the drawings, such as the bill of materials, datasheets, certificates and the transmittal, against the specification section and quotes both sides. It can also list the drawings and data the section asks for, so the package can be checked for completeness by a person.

Evaluation questions

What should an equipment shop drawing show?

Overall dimensions and weights, anchor bolt size and location, connection sizes and positions, clearances for maintenance, materials, and wiring and control diagrams for anything electrical. The specification section lists what it expects.

Frequently asked questions

What is the difference between shop drawings and product data?

Shop drawings are prepared for the project and show how the item will be built and fitted there. Product data is the maker's standard published information, marked to show which model and options apply.

Who prepares shop drawings for equipment?

The manufacturer or fabricator of the equipment. The contractor reviews them against the contract documents and site conditions, stamps them and sends them to the engineer.

Are shop drawings contract documents?

Generally not. They show how the supplier intends to meet the contract documents. Most contracts state that review of a shop drawing does not change the contract requirements unless a variation was flagged and accepted in writing.

References

UFGS 01 33 00 Submittal Procedures

US Department of Defense, Unified Facilities Guide Specifications, hosted by the Whole Building Design Guide

A public guide specification for US federal construction. Used for submittal types, the submittal register and review action wording. Your contract's own submittal section governs.

Visit source

Related Pages