OdysseyGPT

Glossary term

Positive Material Identification (PMI)

A test that checks the alloy of a finished part or weld by measuring its chemical composition, usually with a handheld analyser, to confirm it is the grade the order requires.

Last reviewed by the OdysseyGPT team

What it is

Positive material identification (PMI) is a test that confirms the alloy of a part or weld by measuring its chemical composition, usually with a handheld XRF or OES analyser. It catches material mix-ups. It does not replace the material test report.

Key Takeaways

  • PMI checks the alloy of the actual part, not the paperwork.
  • Handheld XRF is quick but cannot measure carbon; OES can.
  • The specification sets which parts and welds are tested, and how many.
  • PMI reports go into the manufacturing record book with the certificates.

Why it matters

Positive material identification (PMI) checks that a part is made of the alloy it should be. An analyser measures the main alloying elements and compares them with the limits for the specified grade. The two common methods are X-ray fluorescence (XRF), which is quick and leaves no mark, and optical emission spectroscopy (OES), which leaves a small burn but can measure carbon. Standard handheld XRF cannot measure carbon, so it cannot tell some grades apart, for example a low-carbon stainless grade from its standard version. PMI is done on received material, on finished parts and on welds, to the extent the specification sets, which can be every pressure-retaining part or a sample. PMI confirms the alloy. It does not replace the material test report, which also gives mechanical properties and heat treatment.

How OdysseyGPT uses it

OdysseyGPT does not perform PMI. Material Certificate Review (beta) checks material certificates against the purchase requirements, including the supplementary tests the order calls for, and Material Traceability Check (beta) links each heat number from the final tag to its certificate. A PMI requirement in a specification is listed like any other requirement, with its clause cited.

Evaluation questions

When is PMI required?

When the purchase order or specification asks for it. Owner specifications for alloy and stainless steel equipment often require PMI on pressure-retaining parts and welds. API RP 578 gives guidance on material verification programmes.

Frequently asked questions

What is PMI testing?

A check of a part's chemical composition against the specified alloy grade, usually with a handheld XRF or OES analyser. It catches material mix-ups before the part goes into service.

What is the difference between XRF and OES for PMI?

XRF is fast and non-destructive but standard handheld units cannot measure carbon. OES leaves a small burn mark and needs more preparation, but it measures carbon, so it can separate grades that differ mainly in carbon content.

Does PMI replace a material test report?

No. PMI confirms the alloy of the part in front of you. The material test report gives the heat's full chemistry, mechanical properties and heat treatment. Specifications usually ask for both.

References

Positive material identification

Wikipedia

Visit source

Related Pages