OdysseyGPT

Free template

Railway welding documentation checklist for an EN 15085 order (Excel and CSV)

For suppliers of welded rail vehicle parts: the welding documents to hold for one assembly, each set against the drawing and the order and marked complete, query or missing.

By Ademola Afolabi, Founder, New Odyssey Ltd · Last reviewed:

The short answer

A railway welding documentation checklist lists the welding documents a supplier must hold for one welded assembly and shows which are still open. This free Excel template covers certification scope and validity, the welding coordinator, weld classes as the drawing states them, procedures and qualification records, welder qualifications, consumable certificates, inspection and NDE reports, repairs and release.

Key Takeaways

  • The classes come from the drawing. Where it gives none for a weld, ask the designer in writing.
  • Check the certificate's expiry date against the last planned welding day, not against today.
  • A welder's qualification has to be valid on the date in the weld log.
  • The example has 14 documents for an invented bracket frame (PO-EX-5530), with three missing and five in query.

Download the rail welding documentation checklist

Both files are free under CC BY 4.0, with no form to fill in. The XLSX opens in Excel, Google Sheets, LibreOffice and Numbers. The CSV carries the table only; the header block is in the XLSX.

One assembly, one set of welding documents

Rolling stock builders buy welded brackets, frames, tanks and housings from suppliers who have to show two things: that the works is certified for the kind of welding involved, and that each weld on each assembly was planned, made and inspected as its drawing requires. EN 15085 is the standard series most European orders name for this. The design assigns a class to each weld, and the documents that follow depend on that class. The checklist gathers those documents for a single assembly so the welding coordinator can see what is still open before signing the release.

  • Responsible welding coordinators, who own the release.
  • Quality engineers preparing a delivery pack or a customer audit.
  • Buyers at vehicle builders, who can send the list to a new supplier as a statement of what will be asked for.

The template contains no classes, no inspection percentages and no tables from the standard. Every such cell reads "as stated on the drawing", because the drawing and the edition named in the order are where the answer is. Check the governing standard or contract. To match each joint to its procedure and welder in detail, use the WPS/PQR/WPQ cross-check template. See also rail component manufacturers.

Header block

Header block fields, with the invented example values
FieldExample
ProjectExample Regional Train Fleet (fictional)
CustomerExample Rolling Stock Builder Ltd (fictional)
Purchase orderPO-EX-5530 (fictional)
Welded assemblyEquipment bracket frame, 24 welds (fictional)
Drawing and revisionDRG-EX-5530-02 Rev B
Welding standard named in the orderAs stated in the PO (for example EN 15085), with its edition
Customer's welding specificationWS-EX-R-03 Rev 2 (invented)
Checklist no.RWD-EX-5530-02
Date2027-05-20
Prepared byWelding coordinator
Checked byQuality engineer

Example documents: an equipment bracket frame

Invented example rows for assembly DRG-EX-5530-02
ItemDocument or recordWhat the drawing and order requireWhat is on fileDocument no. and revisionStatusRemark
1Manufacturer's welding certification: scopeCertification at the level the PO and the drawing call for, with a scope that covers this assembly's processes and materialsScope lists the welding processes and material groups used on the frameCERT-EX-RW-017Complete
2Manufacturer's welding certification: validityValid on every day welding is done on this assemblyCertificate expires 2027-05-31; welding is planned to 2027-06-18CERT-EX-RW-017QueryThe renewal audit is booked. Hold welding past the expiry date until the new certificate is in hand.
3Welding coordinatorResponsible welding coordinator and deputies named, as the certification and the order requireCoordinator named on the certificate; the deputy has changed since it was issuedAppointment letter AL-EX-04QueryReport the change as the certification scheme requires, and tell the customer.
4Weld performance class for each weldAs stated on the drawing, weld by weldWeld list gives a class for 22 of 24 weldsWL-EX-5530-02 Rev AQueryThe drawing shows no class for welds 17 and 18. Raise a technical query. Do not assume a class.
5Inspection class for each weldAs stated on the drawing, or as the standard named in the order links it to the performance classEntered in the weld list for the 22 welds that have a performance classWL-EX-5530-02 Rev AQueryOpen until item 4 is answered.
6Welding procedure specification (WPS) for each jointA WPS for every joint on the weld list, covering its process, material, thickness and positionThree WPS cover all 24 weldsWPS-EX-31, -32, -35Complete
7Qualification record behind each WPSA qualification record supporting each WPS, by a route the standard named in the order acceptsRecords on file for WPS-EX-31 and -32. None found for WPS-EX-35WPQR-EX-31, -32MissingFind the record or qualify the procedure. Welds made to WPS-EX-35 stay on hold.
8Welder and operator qualificationsEach welder qualified for the process, material and position, and valid on the day the weld was madeFour welders. The certificate of welder W-EX-12 ran out on 2027-04-30; the weld log shows W-EX-12 welding on 2027-05-06Welder list WQ-EX-5530QueryCheck whether the qualification was prolonged in time. If it was not, raise a nonconformance for the welds made after 2027-04-30.
9Welding consumable certificatesA certificate of the type the order states for each batch of filler material, and for shielding gas where askedCertificates for both wire batches and for the gas supplyCC-EX-771, -772; GC-EX-19Complete
10Visual inspection reportsExtent as stated on the drawing for each weld's inspection classOne report covers all 24 weldsVT-EX-0412Complete
11Non-destructive examination (NDE) reportsMethods and extent as stated on the drawing for each weld's inspection class; examiner qualified as the order statesSurface examination report covers six welds. The drawing calls for volumetric examination of welds 3 and 4, and there is no reportMT-EX-0398MissingExamine welds 3 and 4 before the frame is coated.
12Repair recordsEach repair recorded with its location, cause, the procedure used and the re-inspectionOne repair, on weld 9, with re-examinationRR-EX-007Complete
13Production weld tests or work samplesOnly where the drawing or the order asks for themNot asked for on this assemblyNot applicableConfirmed against PO-EX-5530 and WS-EX-R-03.
14ReleaseSigned by the responsible welding coordinator, with the declaration or certificate the order asks forNot signedMissingSign only when items 2 to 11 are closed.

The frame, its 24 welds, the certificate number and the customer's welding specification WS-EX-R-03 do not exist. The example leaves two welds without a class on purpose: the supplier raises a query and does not pick one. Every example value is invented: the project, customer, bidders, purchase order, prices and every document, certificate, serial and report number do not exist. Standards are named but not quoted.

Status values

StatusUse it when
CompleteThe document is on file, covers this assembly and agrees with the drawing and the order.
QueryA document is on file, but something about it is open: a date, a scope, a name or a missing entry. Say what in the remark.
MissingNothing is on file yet, or what is on file does not cover the welds it should. The assembly is not ready for release.
Not applicableNeither the order nor the drawing asks for this document on this assembly. Say why.

Columns and what to write

ColumnWhat to write
ItemRunning number.
Document or recordOne welding document the order, the drawing or the standard named in the order asks you to hold for this assembly.
What the drawing and order requireWhere the requirement is written and what it asks for. For classes and inspection extent write "as stated on the drawing" and the drawing number; do not copy a class or a percentage from memory.
What is on fileWhat you actually hold: its scope, dates and the welds it covers.
Document no. and revisionThe number and revision of the document on file.
StatusComplete, Query, Missing or Not applicable (drop-down). Missing rows turn red; Query rows amber.
RemarkWhat is open, who closes it and by when.

How to build the document set

  1. Fill in the header block: the assembly, its drawing and revision, the welding standard and edition the order names, and the customer's own welding specification if there is one.
  2. Read the drawing first. Write down, weld by weld, the performance class and the inspection class it states. Where the drawing is silent, raise a query; the class is the designer's decision.
  3. Check your certification: that its level and scope cover this work, and that it stays valid until the last weld.
  4. Go down the weld list and match each joint to a WPS, each WPS to its qualification record, and each welder to a qualification valid on the weld date.
  5. Gather the consumable certificates for the batches actually used.
  6. Compare the inspection and NDE reports with the weld list. Every weld needs the examination its class calls for on the drawing.
  7. File a record for every repair, with its re-inspection.
  8. Set the status of each row. Missing rows turn red and Query rows amber. The welding coordinator signs the release when none is left.

Checking welder and procedure records against the weld list

The slow part is the dates and ranges: does this welder's certificate cover that position, and was it in force on the day in the log? In OdysseyGPT's Manufacturing QA module, Welding Qualification Review (beta) reads the weld list, the procedures, their qualification records and the welder certificates and reports the joints where something does not line up, quoting the page. NDE Coverage Review (beta) compares the examination reports with what the drawing calls for on each weld. The welding coordinator remains the person who judges and signs. Tools marked beta are open on request, and we onboard each team ourselves.

Want us to run the check for you?

Send up to 20 material certificates and the purchase order. We send back a certificate check report, each finding cited to its page.

Get the free certificate check

New templates by email (optional)

Your download does not depend on this.

We use your email only for this. See our privacy policy.

Frequently asked questions

What welding documentation does a rail order need?

Typically proof of the manufacturer's welding certification, the named welding coordinator, welding procedures with their qualification records, welder qualifications, consumable certificates, inspection and NDE reports and repair records. The order and the drawing set the exact list.

What is EN 15085?

A European standard series for welding railway vehicles and their components. It covers the certification of welding manufacturers, design requirements, production requirements, and inspection and documentation. Orders name it with an edition, and that edition is the one to read.

Why does the checklist not list the weld classes?

Because the designer assigns them and prints them on the drawing. A supplier who fills in a class from experience takes on a design decision. The template has you copy the drawing or raise a query.

What happens if the manufacturer's certificate expires during the job?

That is for the certification scheme, the order and the customer to answer, so ask before the date arrives. The example row treats it as a query and holds welding past the expiry date. Check the governing standard or contract.

Can I use it for subcontracted welding?

Yes. Send the list to the subcontractor and ask for the same documents. Whether subcontracting is allowed, and under what conditions, depends on your certification and the order.

References

Creative Commons Attribution 4.0 International

Creative Commons

Visit source

Related Pages