OdysseyGPT

Glossary term

Weld Map

A drawing or sketch that shows where every weld on a fabricated item is and gives each weld a unique number.

Last reviewed by the OdysseyGPT team

What it is

A weld map is a drawing that shows where each weld on a fabricated item is and gives every weld a unique number. In piping it is usually the isometric or spool drawing with weld numbers marked on it. The weld log is the matching table of procedure, welder and examination records.

Key Takeaways

  • The weld map is the drawing; the weld log is the table.
  • Every weld gets a unique number before fabrication starts.
  • WPS, welder, heat numbers and NDE reports are all recorded against the weld number.
  • OdysseyGPT needs the weld log as a table. It does not read the drawing.

Why it matters

A weld map shows the position of each weld on a spool, vessel or structure and gives each one a unique number. In piping, the weld map is usually the isometric or spool drawing with weld numbers marked on it, and shop welds and field welds shown differently. The weld map is the picture. The weld log, sometimes called a weld register or weld history sheet, is the table that goes with it. For each weld number the log records items such as the joint type, size and thickness, the welding procedure specification used, the welder, the date, the heat numbers of the two parts joined, and the examination, heat treatment and repair status. Together they let an inspector pick any weld and find who made it, how, and what proves it is acceptable. The customer's specification usually says what the log must record and whether it is kept per spool, per isometric or per line.

How OdysseyGPT uses it

OdysseyGPT reads text and tables, not drawings. It cannot read weld numbers off a marked-up isometric, so it works from the weld log or weld list as a table. Welding Qualification Review (beta) checks each weld in that table against the WPS, PQR and welder qualifications. NDE Coverage Review (beta) matches NDE reports to each weld and reports missing reports, short coverage, the wrong method and repairs not examined again, with a quote for each finding.

Evaluation questions

Does a weld map show field welds?

It should. Shop welds and field welds are normally marked differently, so the fabricator and the site contractor each know which welds are theirs to make, examine and record.

How do I check welding records against a weld map?

Take each weld number in turn. Check the WPS covers the weld, a PQR supports the WPS, the welder was qualified on the date, and the required NDE report exists. See the guide linked below.

Frequently asked questions

What is a weld map?

A drawing that shows where each weld is on a fabricated item and gives every weld a unique number. In piping it is usually the isometric or spool drawing with weld numbers added.

What is the difference between a weld map and a weld log?

The weld map is the drawing that locates and numbers the welds. The weld log is the table that records, for each weld number, the procedure, welder, date, materials and examination status.

What does a weld log record?

For each weld: its number, joint type, size and thickness, the WPS, the welder, the date, the heat numbers joined, and the status of NDE, heat treatment and any repair. The customer's specification may add columns.

Who prepares the weld map?

Usually the fabricator. Weld numbers are added to the isometric or spool drawing before fabrication, and the welding and quality teams keep the weld log up to date as work is done.

References

What is weld mapping?

Projectmaterials

Visit source

ASME BPVC Section IX: Welding, Brazing, and Fusing Qualifications

ASME

The qualification code behind the WPS, PQR and welder records a weld log refers to.

Visit source

Related Pages