Glossary term
Technical File
The set of documents a machine manufacturer compiles to show how the machine meets the essential health and safety requirements. It is kept for the authorities and is not, by law, a customer deliverable.
Last reviewed by the OdysseyGPT team
What it is
A technical file is the set of documents a machine manufacturer compiles to show that the machine meets the essential health and safety requirements. Under the Machinery Directive it holds drawings, calculations, test results, the risk assessment record, the standards used, the instructions and the declaration. It is kept available for the authorities for at least ten years.
Key Takeaways
- The manufacturer compiles it and keeps it available for the authorities.
- It holds the design evidence, the risk assessment record, the instructions and the declaration.
- The law does not make it a customer deliverable. The contract decides what the customer gets.
- The Machinery Regulation renames it technical documentation and adds items.
Why it matters
The technical file is the manufacturer's evidence that a machine meets the machinery rules. Directive 2006/42/EC lists what it holds. In outline there is a construction file with a general description of the machine, the overall drawing and the drawings of the control circuits, the detailed drawings, calculations and test results needed to check conformity, and the record of the risk assessment. That record shows which essential health and safety requirements apply, the protective measures taken and the risks that remain. The file also names the standards and other specifications used, and holds technical reports, a copy of the instructions, the declarations of incorporation and assembly instructions for any partly completed machinery built in, and a copy of the declaration of conformity. For series machines it describes the internal measures that keep production in line with the design. The file must be available to the authorities for at least ten years after the date of manufacture, or after the last unit for series production. It need not be kept as one physical set, but the person named in the declaration must be able to put it together in reasonable time. The Directive requires the file to be available to the authorities. It does not require the builder to give it to the buyer. A customer who wants drawings, calculations, the risk assessment or software as deliverables has to list them in the contract. Under Regulation (EU) 2023/1230 the same set is called technical documentation. The Regulation adds items, among them the source code or programming logic of safety-related software, to be provided on a reasoned request from a national authority. The matching set for partly completed machinery is called relevant technical documentation under the Directive. This is an overview and not legal advice.
How OdysseyGPT uses it
Document Review shows which documents a customer's specification asks to receive, such as the risk assessment, calculations or as-built schematics, and whether your functional specification and quotation offer them, with a quote from each side. VDRL/MDR Tracker (beta) keeps the list of documents the contract says you must submit. OdysseyGPT does not compile or write a technical file, does not carry out the risk assessment and does not read drawings, schematics or PLC code.
Evaluation questions
What if the customer specification asks for the risk assessment?
Treat it as a contract request. Decide whether you will hand it over, show it at a design review or decline, and say so in the offer. If you decline or limit it, list the point as a deviation.
Frequently asked questions
Does the customer get the technical file?
Not by law. The Machinery Directive asks for the file to be available to the authorities. What the customer receives, beyond the instructions and the declaration, is whatever the contract lists.
How long must a technical file be kept?
Under the Machinery Directive, at least ten years after the date of manufacture of the machine, or of the last unit for series production.
Is the technical file the same as the machine documentation package?
No. The documentation package is what the contract says the customer receives: instructions, drawings, parts lists, test reports. The technical file is the builder's own evidence of conformity. The two overlap but are not the same set.
References
Directive 2006/42/EC on machinery (consolidated text)
EUR-Lex
Articles 5 and 13 and Annexes II, VI and VII.
Regulation (EU) 2023/1230 on machinery
EUR-Lex
Articles 10 and 11 and Annexes IV and V. The Commission states it applies from 20 January 2027.
Supply of Machinery (Safety) Regulations 2008: Great Britain
Office for Product Safety and Standards (gov.uk)
Guidance dated March 2025 on the duties of the responsible person, declarations and marking.
