OdysseyGPT

Glossary term

NORSOK M-650

A Norwegian petroleum industry standard that sets how manufacturers of special materials, such as duplex stainless steel, are qualified to supply a given grade and product form.

Last reviewed by the OdysseyGPT team

What it is

NORSOK M-650 is a Norwegian petroleum industry standard for qualifying manufacturers of special materials. It covers duplex and high-alloy austenitic stainless steels, and castings in nickel-base alloys and titanium. A manufacturer shows, for a given material, product form and size range, that it has the competence, facilities and equipment to produce the required properties.

Key Takeaways

  • It qualifies a manufacturer and a production route, not an individual product.
  • The qualification is specific to the works, material, product form and size range.
  • It reaches sub-vendors and stockholders, because the original manufacturer must be qualified.
  • Use the edition your contract names, and check whether ISO 17782 is named too.

Why it matters

NORSOK M-650, Qualification of manufacturers of special materials, is a standard developed by the Norwegian petroleum industry and published by Standards Norway. Its purpose, in the publisher's words, is to set qualification requirements that verify a manufacturer has the competence, experience, facilities and equipment to produce special materials in the required shapes and sizes with the required properties. The idea behind it is simple. Some corrosion-resistant alloys depend heavily on how they are made. Two mills can work to the same material standard and deliver different results if the heat treatment or the forming is not well controlled. So a product certificate alone is not treated as enough. The manufacturer itself has to show, in advance, that its route for a given grade, product form and size range gives the properties. The publisher lists the scope as duplex stainless steel and high-alloy austenitic stainless steel in all grades, product forms and dimensions, and castings in nickel-base alloys and in titanium and its alloys. It adds that the standard may be applied to critical components in other materials and to special processes such as cold bending and induction bending. The qualification is specific. It applies to the manufacturer, the works, the material and the product form that were assessed, and to a range of sizes. A purchaser or an independent qualifying company reviews the manufacturer's facilities, procedures and test results. For a package builder or a valve maker, M-650 is a supply chain requirement. It decides which mills, foundries and forges may stand behind the pipe, fittings, flanges and valve bodies. Material bought through a stockholder still has to come from a manufacturer whose qualification covers it. ISO 17782 is a related international scheme for the same purpose, and some requisitions name it in place of M-650 or beside it. The requirement shows up in the enquiry as one line in a material or piping specification, and it should be passed to every sub-vendor who buys such material.

How OdysseyGPT uses it

OdysseyGPT does not qualify a manufacturer or judge whether a qualification is valid. It checks documents against the customer's stated requirements. Customer Specification Review (beta) lists material and quality requirements in a package, including a call for M-650 qualification and its clause. Material Certificate Review (beta) checks material certificates against your purchase requirements and reports a different grade, a wrong certificate type or a required test that is not shown. Each finding quotes its source, and an engineer decides.

Evaluation questions

What should a package builder ask a sub-vendor for?

The name of the original material manufacturer for each item in a special alloy, and evidence that its qualification covers the grade, product form and size supplied. Ask at enquiry stage, before the sub-vendor has bought material.

Is NORSOK M-650 the same kind of requirement as NACE MR0175?

No. NACE MR0175 / ISO 15156 sets requirements for materials in H2S service. M-650 is about whether a manufacturer is qualified to make a special material at all. A requisition can call for both.

Can OdysseyGPT check a NORSOK M-650 qualification?

No. It can report that the customer's specification calls for it and that a sub-vendor's offer or document set does not address it. Assessing the qualification itself is work for a materials engineer.

Frequently asked questions

What is NORSOK M-650?

A NORSOK standard titled Qualification of manufacturers of special materials. It sets how a manufacturer shows it can make materials such as duplex stainless steel in a given product form with the required properties.

Which materials does NORSOK M-650 cover?

The publisher lists duplex stainless steels and high-alloy austenitic stainless steels in all product forms, and castings in nickel-base alloys and titanium. It may also be applied to other critical components and to bending processes.

Is NORSOK M-650 a product certificate?

No. It qualifies a manufacturer and its production route. The material still comes with its own inspection certificate for each heat or lot, which is checked separately.

Does NORSOK M-650 apply outside Norway?

It applies wherever a contract names it. It was written for the Norwegian continental shelf, and operators and contractors elsewhere also call it up for duplex and similar alloys.

References

M-650 Qualification of manufacturers of special materials

Standards Norway

Publisher's statement of purpose and scope.

Visit source

Qualification of manufacturer of special materials as per NORSOK M-650

TÜV NORD

How a qualification is assessed, described by a certification body.

Visit source

DNV-SE-0079 Qualification of manufacturers of special materials

DNV

A qualifying company's service covering NORSOK M-650 and ISO 17782.

Visit source

Related Pages