OdysseyGPT

Free template

Request for quotation (RFQ) template for engineered equipment (Excel and CSV)

One row per requisition line, the datasheet and specification behind it, the documents and inspection you need, and columns the supplier fills in so offers compare line by line.

By Ademola Afolabi, Founder, New Odyssey Ltd · Last reviewed:

The short answer

A request for quotation (RFQ) for engineered equipment lists each item to be quoted with its datasheet, governing specification, required documents, inspection and delivery date. This free Excel template adds supplier response columns for compliance status, deviation reference and lead time, so the returned files feed straight into a technical bid evaluation.

Key Takeaways

  • Keep item numbers the same as the material requisition, so every offer can be matched line by line.
  • Point each line to its datasheet and specification clauses; do not paste standard text into the RFQ.
  • Ask for an unpriced technical offer and a separate priced commercial offer, so the technical team evaluates without seeing prices.
  • The example has 7 lines for an invented valve package (RFQ-EX-3105), already filled in as one supplier might answer it.

Download the RFQ template

Free under CC BY 4.0, with no form to fill in. The CSV carries the table only; the header block is in the XLSX.

What it is for and who uses it

Buyers at EPC contractors and end users send an RFQ with the material requisition, datasheets, specifications and the vendor data requirements list. Suppliers return a technical offer and a commercial offer. This template is the line-item sheet that travels with the package.

  • Procurement and project engineers who issue the RFQ and later evaluate the offers.
  • Valve, pump, actuator and instrument makers who answer it, line by line, with a compliance status for each.

Header block

Header block fields, with the invented example values
FieldExample
ProjectExample Gas Compression Station, Phase 2 (fictional)
BuyerExample EPC Contractor Ltd (fictional)
RFQ no.RFQ-EX-3105 (fictional)
Revision0
Issue date2026-09-01
Closing date for quotations2026-09-29
Material requisitionMR-VAL-001 Rev 1
Governing specificationPS-VAL-001 Rev 2
Delivery terms (Incoterms) and placeFCA supplier works
CurrencyUSD
Quotation validity required90 days
Technical and commercial offersSeparate: technical offer unpriced, commercial offer priced
Buyer contactProcurement lead (fictional)

Example rows: valve package RFQ-EX-3105

Invented example rows (some columns omitted)
ItemTag(s)QtyDescriptionDatasheet / specDocumentsRequired deliverySupplier: complianceSupplier: lead time (wk)Remarks
1XV-2101 to XV-21066 eaBall valve, trunnion-mounted, 6 in, ASME Class 600, RF flanged, gear operatedDS-VAL-0600 Rev B; PS-VAL-001A01, A02, B01, C01, E0124 weeksDeviation26Seat material offered as RPTFE; see EX-03.
2XV-2201 to XV-22044 eaBall valve, floating, 2 in, ASME Class 600, RF flanged, lever operatedDS-VAL-0200 Rev A; PS-VAL-001A01, C01, E0116 weeksComplies14
3HV-2301 to HV-23022 eaGate valve, 8 in, ASME Class 300, RF flanged, handwheelDS-VAL-0800 Rev A; PS-VAL-001A01, A02, C01, E0120 weeksClarification22Low-temperature impact test temperature to confirm.
4CV-24011 eaCheck valve, dual plate, 6 in, ASME Class 600, waferDS-VAL-0601 Rev A; PS-VAL-001A01, C01, E0118 weeksNot offeredSupplier does not make dual-plate check valves.
5-1 lotCommissioning sparesMR-VAL-001 section 6D02With valvesComplies26
6-1 lotTwo-year operating spares: priced list onlyMR-VAL-001 section 6D02Separate orderCompliesNot part of the order value; for the buyer's evaluation.
7-1 lotDocumentation to the VDRL, including the final data bookVDRL-VAL-001 Rev 1AllPer VDRLClarificationSupplier asks to issue the data book electronically only.

The file also has Key materials, Inspection, Supplier: offered, Supplier: deviation ref. and Supplier: unit price columns. Line 4 shows a Not offered line and line 1 a deviation, each tied to an item in the supplier's deviation list. Every example value is invented: specification PS-VAL-001, the requisition, the datasheets and every certificate and report number do not exist. Standards such as API 6D, API 607, ISO 15848-1 and EN 10204 are named but not quoted, so check each clause against your own licensed copy.

Columns and what to write

ColumnWhat to write
ItemLine number. Keep it the same as the material requisition.
Tag(s)Equipment tag numbers, or a range, so offers can be matched line by line.
QtyQuantity and unit.
DescriptionWhat is being bought, in one line: type, size, rating, end connections.
Key materialsBody, trim and seat materials, or the material class, as the datasheet states them.
Datasheet / specThe datasheet and specification clauses that govern the line. Point to them; do not copy standard text.
Documents requiredVDRL codes that apply to this line, for example drawings, ITP, certificates, data book.
InspectionInspection level or tests the buyer will witness.
Required deliveryDate or weeks after order when the line is needed.
Supplier: offeredSupplier fills in: the model, figure number or datasheet line offered.
Supplier: complianceSupplier fills in: Complies, Clarification, Deviation, Not offered or Not applicable (drop-down).
Supplier: deviation ref.Supplier fills in: the item number in the deviation list, for anything not Complies.
Supplier: lead timeSupplier fills in: weeks from order to delivery at the stated Incoterms.
Supplier: unit priceSupplier fills in, in the commercial copy only. Leave blank in the unpriced technical offer.
RemarksAnything either side needs to know about the line.

Compliance status values

StatusMeaning
CompliesThe offer meets the requirement as written. Point to the datasheet line or certificate that shows it.
ClarificationThe offer meets the intent, but a reference, method or wording differs, or the requirement is unclear or conflicts with another document.
DeviationThe offer does not meet the requirement as written: a different material, rating, test, certificate type or scope.
Not offeredThe item is excluded from the scope of supply, for example spares, site services or documents you are not quoting.
Not applicableThe clause does not apply to the equipment offered, for example a sour-service clause on a non-sour duty. Say why in the remarks.

How to use the template

  1. Fill in the header block: project, RFQ number and revision, closing date, the material requisition and governing specification, Incoterms, currency and the validity you need.
  2. Add one row per line on the material requisition, with tags, quantity and a one-line description. Keep the item numbers the same as the requisition.
  3. For each line, point to the datasheet and specification clauses that govern it, the VDRL codes that apply and the inspection you will witness. Do not paste standard text.
  4. Send the file with the requisition, datasheets, specifications and VDRL. Ask for an unpriced technical offer and a separate priced commercial offer.
  5. Suppliers fill in the Supplier columns: what they offer, a compliance status, a deviation list reference for anything not Complies, and lead time. Unit price goes in the commercial copy only.
  6. When offers come back, copy the supplier columns into a technical bid evaluation (TBE) matrix, one bidder per column set, and raise clarifications from the deviation references.

After the offers come back

Have OdysseyGPT check the RFQ package

Want OdysseyGPT to check an RFQ package against your datasheets?

OdysseyGPT reads the tender package, checks each customer requirement against your own datasheets, and drafts the compliance matrix and deviations & clarifications list, each row with a quote from the source page, sheet or cell. Your engineers decide every open item. Managed plans start from $999/month.

Request a demo

New templates by email (optional)

Your download does not depend on this.

We use your email only for this. See our privacy policy.

Frequently asked questions

Is there a free RFQ template in Excel?

Yes. This XLSX template has a header block, a blank RFQ sheet, a filled-in example for an invented valve package and a How to use sheet. A CSV of the same columns is also free under CC BY 4.0.

What should an RFQ for engineered equipment include?

The items with tags and quantities, the datasheet and specification that govern each, the documents required under the VDRL, the inspection the buyer will witness, the delivery date, Incoterms, currency, offer validity and the closing date.

What is the difference between an RFQ, an RFP and an RFI?

An RFQ asks for prices and compliance against a defined requirement. An RFP asks suppliers to propose how they would meet a need. An RFI gathers information before either. Engineered equipment is usually bought by RFQ against a requisition and datasheets.

Why separate the technical and commercial offers?

So the engineers who judge technical compliance do not see prices. The buyer evaluates the unpriced technical offers first, then opens the commercial offers of the technically acceptable suppliers.

References

Creative Commons Attribution 4.0 International

Creative Commons

Visit source

Related Pages