Glossary term
SIL Certificate
A certificate from an assessment body stating that a device has been assessed against IEC 61508 and is suitable for use in safety functions up to a stated safety integrity level, under stated conditions.
Last reviewed by the OdysseyGPT team
What it is
A SIL certificate is a functional safety certificate for a device such as a transmitter, valve or actuator. An independent body assesses the device against IEC 61508 and states the safety integrity level up to which it may be used, under stated conditions. It does not certify the complete safety loop.
Key Takeaways
- The certificate covers a named device, a named function and stated conditions of use.
- It normally comes with an assessment report and a safety manual.
- IEC 61508 does not itself require certification; the tender often does.
- The system designer verifies the complete safety function.
Why it matters
A SIL certificate is the common name for a functional safety certificate issued for a device such as a transmitter, a valve, an actuator or a logic solver. An independent assessment body reviews the device and its development process against IEC 61508 and issues a certificate, normally with an assessment report behind it. The certificate usually names the exact product and versions covered, the safety function assessed, the systematic capability, the hardware fault tolerance and safe failure fraction or the route used to justify the architecture, and the failure rate data a system designer needs. The device maker also issues a safety manual that states the conditions for safe use, such as proof test requirements and configuration limits. Three points are often misunderstood. First, IEC 61508 does not require third-party certification; a certificate is one accepted way of showing compliance. Second, a certificate is specific to a function, a level and a set of conditions of use. Third, a certified device does not make a loop SIL-rated. The integrator must still verify the whole safety instrumented function under IEC 61511, combining the sensor, logic solver and final element. That is why careful suppliers say a device is "suitable for use up to SIL 2" and avoid calling it "a SIL 2 device".
How OdysseyGPT uses it
OdysseyGPT does not assess devices, does not calculate failure probabilities and does not issue SIL certificates. Document Review reads the customer's specification and datasheets for functional safety requirements, such as the required level, the evidence to be supplied and any restriction on who may certify, and checks them against the documents you offer. Each finding quotes its source. Whether your certificate, report and safety manual satisfy the customer is a decision for your functional safety engineer.
Evaluation questions
What should a bid engineer check on a SIL certificate?
That it names the exact model and versions offered, covers the safety function the customer needs, states the level asked for, is in date, and comes from a body the tender accepts. Then send the safety manual with it.
What is systematic capability on a SIL certificate?
A measure of how well the device's design and development process guard against systematic faults, such as design errors. It caps the level the device can be used at, whatever the hardware failure rates are.
Does OdysseyGPT verify SIL calculations?
No. It reads documents and reports where the customer's written functional safety requirements are not matched by the documents offered. The calculation and the judgement stay with your engineers.
Frequently asked questions
What is a SIL certificate?
A certificate from an assessment body stating that a named device has been assessed against IEC 61508 and can be used in safety functions up to a stated safety integrity level, under the conditions in its safety manual.
Is a SIL certificate mandatory?
IEC 61508 does not require third-party certification. Many owners and contractors require it in their specifications, and some name the bodies they accept. Read the tender to see what evidence is asked for.
Does a SIL-certified device make the loop SIL-rated?
No. The certificate covers one device. The safety instrumented function is verified as a whole, including the sensor, logic solver and final element, by whoever designs the system under IEC 61511.
Who issues SIL certificates?
Independent assessment bodies. Device makers commonly name organisations such as TÜV and exida. A tender may list the bodies the owner accepts, so check before you offer.
References
IEC 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC
Paid standard.
Demystifying functional safety certification
Intertek
Safety integrity level (SIL)
Festo
Functional safety standards: IEC 61508 vs IEC 61511
exida
