OdysseyGPT

Glossary term

RAMS

Reliability, availability, maintainability and safety. In railway contracts the four are specified and demonstrated together, following the process in EN 50126.

Last reviewed by the OdysseyGPT team

What it is

RAMS stands for reliability, availability, maintainability and safety. In railway engineering the four are specified and demonstrated together, following the life-cycle process in EN 50126. The standard sets no targets. The customer states them, and a supplier shows they are met with documents such as a reliability prediction, an FMECA and maintainability data.

Key Takeaways

  • The four qualities are managed together because a change to one affects the others.
  • EN 50126 gives a process tied to the life cycle. It gives no numbers.
  • Targets and deliverables come from the customer's specification and contract.
  • RAMS requirements are often split between the specification, the document list and the commercial terms.

Why it matters

RAMS is the abbreviation for reliability, availability, maintainability and safety. Reliability is about how often an item fails. Availability is about how much of the time it is ready to do its job. Maintainability is about how quickly and easily it can be kept in working order or put back into it. Safety is about keeping the risk of harm acceptably low. Railway projects treat the four as one subject because they pull on each other. A unit that trips at the slightest doubt may be safer and is less available. A unit that takes a shift to replace drags availability down however seldom it fails. The reference standard is EN 50126, Railway applications: The specification and demonstration of reliability, availability, maintainability and safety. Part 1 describes a generic RAMS process that follows the life cycle of a system, from the first concept through design, manufacture and acceptance to operation and decommissioning. Part 2 covers the systems approach to safety. The standard gives a process. It does not give targets for any product. A train builder works out the targets for the whole vehicle, shares them out to subsystems and passes each supplier its portion in the technical specification or a separate RAMS specification. The supplier is then asked to show, with analyses and later with test and service data, that its unit meets them. Typical requests are a RAMS plan, a reliability prediction, a failure modes, effects and criticality analysis, inputs to the customer's hazard log, and maintainability data such as task times and intervals. These are customer requests, and they vary from one contract to the next. In a tender, RAMS requirements are often spread across several documents: figures in the specification, deliverables in a document list, and penalties in the commercial terms. Read all three before you state compliance.

How OdysseyGPT uses it

Customer Specification Review (beta) lists the RAMS obligations in a tender package as separate lines, each tied to its clause. Document Review checks them against your RAMS plan and offer documents and quotes both sides for each finding, so a target or a deliverable with no answer shows up as not addressed. OdysseyGPT performs no RAMS analysis. It does not calculate a failure rate, build an FMECA or assess a hazard. Your RAMS engineer does that work and decides every status.

Evaluation questions

What RAMS documents does a rail component supplier usually deliver?

Commonly a RAMS plan, a reliability prediction, an FMECA, hazard log inputs and maintainability data, each due at a design review. The contract decides the list.

Frequently asked questions

What does RAMS stand for?

Reliability, availability, maintainability and safety. In rail the term refers to the four qualities and to the engineering work of specifying and demonstrating them.

Is this the same RAMS as a risk assessment and method statement?

No. In UK construction and site work, RAMS also means risk assessments and method statements, the documents that describe how a task will be done safely. In railway engineering it means reliability, availability, maintainability and safety. A rail supplier may meet both uses.

Who sets the RAMS targets for a component?

The customer. A train builder shares out its vehicle-level targets to subsystems and states each supplier's portion in the specification. EN 50126 sets no figures.

References

EN 50126-1:2017 Railway applications. The specification and demonstration of RAMS. Part 1: Generic RAMS process

Estonian Centre for Standardisation and Accreditation (EVS)

Paid standard. Catalogue page used for scope.

Visit source

EN 50126-2:2017 Railway applications. The specification and demonstration of RAMS. Part 2: Systems approach to safety

Estonian Centre for Standardisation and Accreditation (EVS)

Paid standard. Catalogue page used for the title and scope.

Visit source

Related Pages