Glossary term
Weld Traceability
The ability to take any weld and find who made it, when, to which procedure, in which materials, and which examination records cover it.
Last reviewed by the OdysseyGPT team
What it is
Weld traceability is the chain of records behind each weld. From the weld number, a fabricator can find the welder, the date, the welding procedure and its qualification record, the heat numbers of the parts joined and the examination reports. The chain also works backwards, from any record to every weld it affects.
Key Takeaways
- The weld number is the key that ties the records together.
- The chain must work both ways: weld to record, and record to weld.
- On spools it also runs up to the spool, isometric and line.
- Most breaks are record-keeping errors found too late, at release or handover.
Why it matters
Weld traceability is the chain of records behind each weld. It starts with the weld number on the weld map. From that number the weld log leads to the welding procedure specification used, the procedure qualification record that supports it, the welder and the welder's qualification, the date, the heat numbers of the parts joined and of the filler where the specification asks for it, and the reports for examination, heat treatment and any repair. The chain has to work in both directions. From a weld you can find its records. From a record, such as a welder whose qualification lapsed or a heat with a failed certificate, you can find every weld affected. In spool fabrication the chain also runs upward, from the weld to the spool, the isometric and the line. Traceability breaks in ordinary ways: a weld number reused after a spool is revised, a welder's stamp missing from the log, a repair with no later examination report, or a cut piece of pipe that lost its heat number. Customers check the chain at inspection and again in the data book.
How OdysseyGPT uses it
OdysseyGPT checks the paper chain, using the weld log and the records it refers to. Welding Qualification Review (beta) checks each weld against the WPS, PQR and welder qualifications, including whether the welder was qualified on the date of the weld. NDE Coverage Review (beta) checks each weld has the required reports. MRB Traceability Verification (beta) checks the links inside a finished record book. It does not read drawings and cannot see markings on the pipe.
Evaluation questions
Is there software for weld traceability?
Yes. Weld management systems record welds as they are made. OdysseyGPT's Welding Qualification Review (beta) and NDE Coverage Review (beta) check the records afterwards against the customer's requirements, with a quote for each gap.
What are common weld traceability gaps?
A weld with no welder recorded, a welder whose qualification had lapsed on the weld date, a WPS that does not cover the thickness, an NDE report that names the wrong weld number, and a repair with no later examination.
Frequently asked questions
What is weld traceability?
The ability to take any weld and find its records: the welder, the date, the welding procedure and its qualification, the materials joined and the examination reports. It also works in reverse, from a record to every weld it affects.
How do you maintain weld traceability on pipe spools?
Number every weld on the isometric or spool drawing before fabrication. Record the WPS, welder, date and heat numbers against each number in the weld log as the work is done, and reference the weld number on every NDE, heat treatment and repair report.
Is weld traceability the same as material traceability?
No, but they meet at the weld. Material traceability links each part to its heat number and certificate. Weld traceability links each weld to its welder, procedure and examination. A weld log usually records the heat numbers on both sides of the joint.
Why do customers ask for weld traceability?
So that a problem can be contained. If a welder, a procedure or a batch of material is found to be at fault, traceability shows exactly which welds are affected, without examining every weld again.
References
What is weld mapping?
Projectmaterials
ASME BPVC Section IX: Welding, Brazing, and Fusing Qualifications
ASME
